Lutz Drum Pump MMS/MSL-ALU 41 For Neutral Liquids


Lutz, Drum, Container, Pumps, Non-Flammable LiquidsThe robust Lutz pump tube with mechanical seal or sealless is suitable for pumping non-aggressive, clean, thin-bodied and slightly viscous liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

Features:

  • Suitable for neutral, non flammable liquids in non-explosive areas

  • Optional with electric or air driven motors

  • No grease fillings

  • Optimized drum drainage

  • Modular, service friendly design

Benefit

  • Sealless version cannot fail by dry running

  • Non-lubrictated, thus no contamination of the liquids pumped

  • All-purpose resistant PTFE shaft bearing

  • Two impeller geometries for a tailored pump characteristic

  • Easy maintenance without special tools

  • Sealing modules of mechanical sealed (MMS) resp. of sealless (MSL) pumps are replaceable

Sealing system:
Mechanical seal (MMS) or sealless construction (MSL)

Type of impeller:
Axial-flow rotor (R) for high delivery rate and low delivery head or Radial-flow impeller (L) for low delivery rate and high delivery head.

Immersion length:
MMS/MSL:
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)

MSL only:
59" (1500 mm)
(Special length on request)

Technical Data

Materials MMS-ALU MSL-ALU
Housing: ALU, PVDF ALU, PVDF
Seals: Viton® -
Mechanical seal: Carbon, SiC, Viton®,
HC-4 (2.4610)
-
Bearings: PTFE PTFE
Drive shaft: Stainless steel (316)          Stainless steel (316)
Impeller: ETFE ETFE
Type of impeller: Radial-flow (L)
or Axial-flow (R)
Radial-flow (L)
or Axial-flow (R)
Nominal diameter: 1.61 in
41 mm
1.61 in
41 mm
Temperature of medium: up to 212 °F
up to 100 °C
up to 212 °F
up to 100 °C
Hose connection: 1 1/4" male BSP 1 1/4" male BSP
Length: 27" /39" / 47"
700 / 1000 / 1200 mm
27" / 39" / 47" / 59"
700 / 1000 /1200 / 1500 mm
   
Operating data Axial-flow (R) Radial-flow (L)
Delivery rate:* up to 48 GPM
up to 180 l/min
up to 24 GPM
up to 90 l/min
Delivery head:* up to 33 ft.
up to 10 m wc
up to 69 ft.
up to 21 m wc
Viscosity:** up to 850 cps
up to 850 mPas
up to 1100 cps
up to 1100 mPas

Motors

Motor B 36 / MI 4
Motor B 36-SC / MI 4 E

mi

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 110-120 V / 60Hz,
    640 W / 0.85 HP
  • Open drip proof in accordance with protection class IP 24, double insulated, 16' (5 m) cord and plug

csa


Motor B 28

B28

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Internally ventilated
  • 110-120 V / 60Hz,
    800 W / 1.07 HP
  • Open drip proof, double insulated, 16' (5 m) cord and plug

Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 110-120 V / 60Hz,
    510 W / 0.68 HP (B 55-T-5)
    700 W / 0.93 HP (B 55-T-7)
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16' (5 m) cord and plug

CSA


Motor MD-1 / MD-2

MD-1 / MD-2

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)

Motor 4/GT

4/GT

Light, easily handled compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Delivery flow is easy to control
  • 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)

Motor MA II 3-12V

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Robust and powerfull
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 12 V DC,
    260 W / 0.35 HP
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10' (3 m) cord with alligator clips

Motor B 4/GT

B 4/GT

Reliable and persistant three-phase gear motor suitable for pumping thin-bodied to slightly viscous liquids in plant construction and stationary use.

  • Robust and durable
  • Especially smooth and quiet operation
  • Long maintenance intervals
  • 230/440 V / 60Hz
    750 W / 1.0 HP
  • TEFC splash-proof in accordance with protection class IP 54

Catalogue Pages Downloads
Lutz Pump Catalogue

Performance Curves Downloads
MSL/MMS-ALU/SS 41 with Motor 4/GT
MSL/MMS-ALU/SS 41 with Motor B28
MSL/MMS-ALU/SS 41 with Motor B36/MI 4
MSL/MMS-ALU/SS 41 with Motor B55-T-5/MA II 5
MSL/MMS-ALU/SS 41 with Motor MA II 3 - 12V
MSL/MMS-ALU/SS 41 with Motor MD-1/MD-2

Dimensional Drawings Downloads
Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor 4/GT
Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B28
Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B36/MI 4
Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B55T/MAII
Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor MAII 3 - 12V

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch