Lutz Drum Pump SL-HC 42 For
Extremely Corrosive Liquids


Lutz, Drum, Container, Pumps, Non-Flammable LiquidsThe robust sealless pump tube is suitable for pumping nearly all kinds of liquids, whether extremely aggressive, clean or dirty, thin-bodied or slightly viscous non-flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

Features:

  • Suitable for highly corrosive chemicals in non-explosive areas

  • Optional with electric or air driven motors

  • No grease fillings

  • Optimized drum drainage

  • Modular, service friendly design

Benefit

  • Sealless version cannot fail by dry running

  • Non-lubrictated, thus no contamination of the liquids pumped

  • All-purpose resistant PTFE shaft bearing

  • Two impeller geometries for a tailored pump characteristic

  • Easy maintenance without special tools

  • Sealing modules of mechanical sealed (MMS) resp. of sealless (MSL) pumps are replaceable

Sealing system:
Sealless construction (SL)

Type of impeller:
Axial-flow rotor (R) for high delivery rate.

Immersion length:
39" (1000 mm) and 47" (1200 mm)
(Special length on request)

Technical Data

Materials SL-HC
Housing: HC-22 (2.4602)
Seals: Viton® (FEP coated)
Mechanical seal: -
Bearings: Carbon
Drive shaft: Stainless steel (316)
Impeller: ETFE/Carbon
Type of impeller: Axial-flow (R)
Nominal diameter: 1,65"
42 mm
Temperature of medium: up to 248 °F
up to 120 °C
Hose connection: 1 1/4" male BSP
Length: 39" / 47"
1000 /1200 mm
 
Operating data Axial-flow (R)
Delivery rate:* up to 54.5 GPM
up to 205 l/min
Delivery head:* up to 40 ft.
up to 11 m wc
Viscosity:** up to 850 cps
up to 850 mPas

Motors

Motor B 36 / MI 4
Motor B 36-SC / MI 4 E

mi

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 110-120 V / 60Hz, 640 W / 0.85 HP
  • Open drip proof in accordance with protection class IP 24, double insulated, 16' (5 m) cord and plug

csa


Motor B 28

B28

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Internally ventilated
  • 110-120 V / 60Hz, 800 W / 1.07 HP
  • Open drip proof, double insulated, 16' (5 m) cord and plug

Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 110-120 V / 60Hz,
    510 W / 0.68 HP (B 55-T-5)
    700 W / 0.93 HP (B 55-T-7)
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16' (5 m) cord and plug

CSA


Motor MD-1 / MD-2

MD-1 / MD-2

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)

Motor 4/GT

4/GT

Light, easily handled compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Delivery flow is easy to control
  • 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)

Motor MA II 3-12V

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Robust and powerfull
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 12 V DC, 260 W / 0.35 HP
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10' (3 m) cord with alligator clips

Motor B 4/GT

B 4/GT

Reliable and persistant three-phase gear motor suitable for pumping thin-bodied to slightly viscous liquids in plant construction and stationary use.

  • Robust and durable
  • Especially smooth and quiet operation
  • Long maintenance intervals
  • 230/440 V / 60Hz
    750 W / 1.0 HP
  • TEFC splash-proof in accordance with protection class IP 54

Catalogue Pages Downloads
Lutz Pump Catalogue

Performance Curves Downloads
MS-HC 38 with Motor 4/GT
MS-HC 38 with Motor B28
MS-HC 38 with Motor B36/MI 4
MS-HC 38 with Motor B55-T-5/MA II 5
MS-HC 38 with Motor MA II 3 - 12V
MS-HC 38 with Motor MD-1/MD-2

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch