Fully Automatic DI/RO Bank Switching System

AQUASWITCH, I, Fully Automatic, DI/RO, Bank, Switching, System, Myron L CompanyFeatures

  • Automatically switches from exhausted to fresh DI/RO bank

  • Push-button override for immediate bank change-over

  • Adjustable purge timer for “fail-safe” operation

  • LEDs continually give status on both DI/RO banks

  • Alarm output activated as each bank is depleted

  • IP65/NEMA 4X splash & corrosion proof enclosure

What it Does:

The AQUASWITCH I™ is a special purpose dedicated computer which automatically “changes out” an exhausted Dl or RO bank for a fresh stand-by bank. LEDs continually give the condition of both banks. An alarm output is activated as each bank is depleted.

How it Works:

When the monitor/controller senses poor quality water because the DI or RO system has been shut down temporarily, the AQUASWITCH I purges the “on-stream” bank until water quality recovers. If the DI or RO bed bank is exhausted, however, water quality will not improve sufficiently after purging. The AQUASWITCH I will then automatically take the exhausted bed or tank out of service and switch over to the stand-by bank. The fresh bank is purged until the desired quality level is reached: it then goes into service. The purge cycle is controlled by a timer that is easily adjustable for periods from 1-10 minute duration. This feature allows the system to be tailored to the requirements of each application, and ensures banks are not switched or shut down prematurely. A “manual change over” button can be depressed to switch banks at any time.

The AQUASWITCH I features advanced circuitry, including three solid state (not mechanical) relays to reliably operate the solenoid valves. Three or four solenoid valves suitable for ultrapure water (not supplied) are needed to make a complete AQUASWITCH I system.

The AQUASWITCH I does not monitor water quality itself, but may be used with any reliable Resistivity or Conductivity Monitor/controller such as the Myron L 750 Series II.

(includes specs, options & order info)

Operation Manual

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.


Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch