Metex Corporation

Metex Corporation

Oakton Instruments

Oakton Instruments

Benchtop Temperature Controllers

Benchtop Temperature Controllers

Temp 9000

Temp 9500

Benchtop Temperature Controllers
Oakton® Temp 9000


Benchtop Temperature Controllers Oakton® Temp 9000

  • Oakton Temp 9000, Standard, Benchtop Temperature Controllers, Oakton, InstrumentsOutlet receptacle allows for direct plug-in of heating devices such as hot plates, heat tapes, or mantles.

These temperature controllers can be used for a wide variety of applications including pilot process plants, R & D labs, or for OEM requirements. Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error.

Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in ºF, ºC, K (Kelvin), or ºR (Rankine). Front panel LEDs indicate output and alarm conditions.

The 115 VAC models include a 6-ft (1.8-m) power cord and US standard plug and receptacle; the 230 VAC models feature an IEC cord set and universal receptacle. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

Safety features—Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemperature protection shuts down the system if the user-settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

Oakton Temp 9000/9500 Standard Benchtop Temperature Controllers

Control type Simple On/Off Control
Ramp/Soak None
Temperature Sensor Thermocouple types J,K,T,E,N,B,R, S
OutputControl None
OutputCurrent 10 VAC amp maximum

Control type: on/off
Resolution: 0.1º; 1º above 999.9º and below –99.9º
Accuracy: Types J, K, T, E, and N: +/-0.1% of reading, +/-0.7ºF (0.4ºC) above –248ºF (–100ºC); +/-0.1% of reading, +/-2ºF (1ºC) below –248ºF (–100ºC) Types B, R, and S: +/-0.1% of reading, +/-1.8ºF (1.0ºC)
Display: LCD
Operating ambient: 32 to 104ºF (0 to 40ºC); 0 to 90% RH, noncondensing
Control output: powered receptacle rated for 115/230 VAC, 10 A max
Alarm output: one SPDT relay rated for 230 VAC, 2 A max; resistive
Dimensions (W x H x D): 8" x 33/4" x 9" (20.3 x 9.5 x 22.9 cm)

 

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch