Single Head Fixed Output Metering Pump
- Classic Series From Stenner



Single Head Fixed Output Metering Pump - Classic Series From Stenner

The electro-mechanical Classic Single Head Fixed Output Pump works well with controllers.

The Classic Series Single Head Fixed Output Pump is a peristaltic metering pump that injects solutions at a fixed rate. It can be activated by a water meter for proportional feed for drinking water disinfection for animal health or homeowners or installed with a controller for sanitizing a swimming pool. Great news for installers in the commercial pool industry, the Classic Series single head fixed pump has been tested by ETL to conform to the ANSI/NSF standard 50 when used with ANSI/NSF 50 listed controllers. Additional applications include pH control, oxidation, corrosion and scale control and more.

The pump is also a component of Stenner’s pre-assembled panel system known as the Proportional Injection System. The Proportional Injection System doses solution that is proportional to a water system’s flow rate based on the water volume. A water meter sends a signal to Stenner’s PCM (Pump Control Module) which actuates the fixed output pump. The system is suited for constant pressure (variable speed) well pumps, poultry and livestock houses, irrigation and systems with demand based backup wells and any application with varying flow rates. If a pre-assembled system isn’t your preference, the pump, PCM and water meter are also available separately. Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump or Contact Us.

Unique Stenner Features

  • Interchangeable pump heads and tubes to convert one model to another; not necessary to purchase a new pump.

  • Easy and fast tube replacement without tools with the QuickPro® pump head.

  • The pump is built with two detachable components; the motor and the pump head that can be separated without tools.

How the Single Head Fixed Chemical Injection Pump Works

The output is not adjustable and is determined by the rpm of the motor gears and the size of the pump tube. The motor’s output shaft rotates at a fixed rpm which drives the roller assembly within the pump head.


The 45 and 85 models are two sub-series within the Classic Series Single Head Pumps (Adjustable and Fixed) and below is a summary of the primary differences in the Fixed models.

45 SeriesAdjustable 85 Series Adjustable
  • 26 rpm

  • 3, 10, or 22 gpd up to 100 psi
    (11.4, 37.9, 83.3 lpd at 6.9 bar)

  • 3, 10, 22, 35 or 50 gpd up to 25 psi
    (11.4, 37.9, 83.3, 132.5, 189.3 lpd at 1.7 bar)

  • 44 rpm

  • 5, 17 or 40 gpd up to 100 psi
    (18.9, 64.4,151.4 lpd up to 6.9 bar)

  • 5, 17, 40, 60 or 85 gpd up to 25psi
    (18.9, 64.4, 151.4, 227.1 & 321.8 lpd up to 1.7 bar)

Product Manual
Classic Single Head Fixed Output Spec Sheet
Chemical Resistance Guide

Maximum Operating Temperature 125F (52C)
Maximum Suction Lift 25 ft (7.6 m) vertical lift, based on water
Motor Type 1/30 HP, shaded pole, class B
Duty Cycle Continuous
Motor Voltage (Amp Draw) 120V 60Hz 1PH (1.7)
220V 60Hz 1PH (0.9)
Power Cord Type SJTOW
Power Cord Plug End 120V 60Hz NEMA 5/15
220V 60Hz NEMA 6/15
230V 50Hz CEE 7/VII
250V 50Hz CEE 7/VII
Materials of Construction
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene®*, optional Versilon™** #1, #2 & #5 tubes,
FDA approved
CV Duckbill with Versilon™** Tube Pellathane®†
Pump Head Rollers HDPE
Roller Bushings Oil impregnated sintered bronze
Suction/Discharge Tubing,
Ferrules 1/4" & 6 mm
Polyethylene, FDA approved
Tube Fittings, Check Valve Fittings Gray fittings: Type 1 Rigid PVC, NSF listed
Black fittings: PP, NSF listed
Connecting Nuts PP or Type 1 Rigid PVC
3/8" Adapter Type 1 Rigid PVC, NSF listed
Suction Line Strainer PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners Stainless steel
Pump Head Latches Polypropylene


Listings vary by model.

* Santoprene® is a registered trademark of Exxon Mobil Corporation.
** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.
† Pellathane® is a registered trademark of The Dow Company.

Pump Dimensions

Shipping Weight: 8 lbs (3.6 kg)

Box Dimensions: 13 x 8 x 9 in. (33 x 20 x 23 cm)


Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.


Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch