Fuel Oil Pump Packages
Fuel Oil Filtration System
Parts and Accessories
L05 Series Utility Duty Gear Pumps
From Albany Pump Company Ltd
L05 Series Ultilty Pumps
The L05 series Utility Gear Pump is a close tolerance,low flow, high pressure positive displacement pump. It's compact close coupled design, and quiet running helical gears, make this an economic, yet premium quality pump.
Standard rotation has the pump discharge on the right (facing the pump end). Standard Motors are uni-directional, so to change the rotation on the pumps simply loosen the bolt that holds the pump-end to the motor, and rotate the pump 180 degrees so the discharge is on the left.
To ensure a long life to this pump a strainer is always recommended in the front of the pump inlet. Seals are easily replaced by removing the seal retaining ring, and pulling out the mechanical seal.
PORTS: 1/2" NPT / 12.7 mm
CAPACITY: 5.75 USGPM / 0.37 L/s (Max.)
PRESSURE: 150 PSI / 10.5 Bar (Max.)
INLET PRESSURE: 50 PSI / 3.5 Bar (Max.)
TEMPERATURE: 225 Fahrenheit(100 Celsius)(Buna Seal)