Fuel Oil Pump Packages
Fuel Oil Filtration System
Parts and Accessories
Albany Fuel Oil Filtration Unit
Albany Pump AF Series Fuel Oil Filtration and Polishing Systems are self-contained, pre-packaged and pre-wired units specifically designed to purify and filter stored diesel fuel. Preserving the integrity of the diesel fuel helps ensure trouble-free generator starts and reduces annual maintenance, contaminated fuel disposal and annual reservoir cleaning costs.
Maintaining clean and dry diesel fuel also discourages the growth of algae and bacteria while helping to reduce the need for expensive chemicals and biocide additives. Albany Pump AF Series Fuel Oil Filtration and Polishing Systems are fully automated with tank monitoring capabilities and are capable of servicing multiple tanks.
At the heart of each system is a diesel fuel purifier that is a simple one step unit. It removes nearly 100% of the free water and up to 98% of Particulate (to 2 microns). Even today's "clean" diesel fuel becomes contaminated all too easily. Water enters fuels systems through vents, leaks, and sometimes with the delivered fuel. Micro organisms can grow in fuel, especially in the presence of moisture.
Each System Includes:
Albany L or G Series Positive Displacement Gear Pump with adjustable internal relief valve and totally enclosed fan cooled industrial motor. Shut-off valves and flanges are positioned so the pump may be removed for servicing without disturbing piping.
Stage One: Separation
Stage Two: Coalescing
Stage Three: Filtration
Filtration Unit Overview:
The Albany Fuel Oil Filtration Assembly is designed to circulate and clean fuel stored diesel fuel at critical facilities. Fuel Oil Filtration and Polishing has become an important aspect of emergency power reliability: Many critical facilities store increasing amounts of fuel onsite to assure continuity of operation and this fuel has low turnover in operation.
The Albany Fuel Oil Filtration Assembly has an innovative compact design has a minimal footprint for Filtration / Polishing of tanks from 500 to 50,000 gallon capacity.
The mechanical design is based on our own Albany Pumps and Racor filters and is complete with strainers, check valves, ball, valves, pressure / vacuum gauges, relief valves. The unit is mounted on an integral containment with leak detection monitoring.
The Filtration Assembly includes a motor starter panel, with disconnect switch, Automatic operation and monitoring with HOA switches and an emergency stop.