Coupled Multielectrode Sensor Probes


CMS probes are made from user-specified sensing materials, including carbon steels, stainless steels, and nickel-, aluminum-, and copper-based alloys. They can also be made from customer supplied materials that have the same microstructure/heat treatment as the system component materials to be monitored.

The size of the sensing electrode varies from 0.1 to 3 mm (0.004" to 0.12") in diameter, depending on the application. Typical numbers of electrodes in a CMS probe are 9, 16 or 25 for online corrosion monitoring and vary from 8 to 100 for laboratory corrosion and electrochemical studies. Other sizes and numbers of electrodes are available.

CMS Probes with Flush Mounted Electrodes

Typical Applications:

Quantitative Corrosion Monitoring and Electrochemical Studies for:

  • Pitting corrosion

  • Crevice corrosion

  • General corrosion (most types)

  • Inhibitor evaluation

  • Cathodic/anodic protection

in the following environments:

  • Aqueous solution

  • Humid gases

  • Soil

  • Oil-water mixture


 
CMS Probes with Exposed Electrodes

Typical Applications:

Quantitative Corrosion Monitoring of:

  • Pitting corrosion

  • Crevice corrosion

  • General corrosion (most types)

  • Cathodic/anodic protection effectiveness

  • Coating evaluation

in the following environments:

  • Aqueous solution

  • Soil

  • Oil-water mixture

  • Under coating

Exposed electrodes increase the sensing signal for an extremely low corrosion rate and reduce the effect of crevice between the electrodes and the insulation materials. An exposed electrode can be painted with coatings and be used for undercoating corrosion monitoring.


 
CMS Probes for High Temperatures and High Pressures

Typical Applications:

Quantitative or Qualitative Corrosion Monitoring of:

  • Pitting corrosion

  • Crevice corrosion

  • General corrosion (most types)

in the following environments:

  • Super critical water systems

  • Steam generators

  • High temprature and/or high pressure reactors

  • High pressure pipelines

  • Furnaces

  • Fireside of boilers

  • Flue gas stacks


 
<< Return to nanoCorr homepage

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch