Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument

Dual Output Isolated Signal Conditioner (Splitter) Model DR4302


Dual Output Isolated DIN Rail Mounted Signal Conditioner (Splitter) Model DR4302

TERMINAL CONNECTIONS
Input +
Input -
Output 1 +
Output 1 -
Output 2 +
Output 2 -
Power DC +
Power DC - 
(Terminal Labeled)
Input +
Input -
Output 1 +
Output 1 -
Output 2 +
Output 2 -
24 VDC +
24 VDC -
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument

Features

Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument

Provides Two Individual Galvanic Isolated DC Outputs Proportional to DC Input

Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
Plug-in Screw Terminal Blocks
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
Unlimited* Choice of Input/Output Ranges
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
21 to 28 VDC Power
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
DIN Rail Mount - Case Only 0.5" Wide
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
3 Year Warranty
Dual Output,Isolated,Signal Conditioner,Splitter,Model DR4302,Wilkerson Instrument
UL/cUL Recognized

Description

The DR4302 provides two individually isolated DC outputs, proportional to a DC input, with 4 way isolation between input, power, and outputs. The unit is useful in eliminating ground loops and measuring signals with large common mode voltages.

All of the DR Series of products provide transient protection to help eliminate damage from lightning and from other transients coupled onto the power and signal leads by system wiring.

Typical Applications

Provides isolation between field instrumentation and control room.  Use for reducing noise created by ground loops. Also use for signal conversion (voltage to current) and increasing drive capacity.

Mounting
All DR Series products are designed to mount on a 35 mm DIN rail. The products feature a steel mounting clip, with a compression spring, for secure mounting.

Specifications

INPUT RANGE
Voltage
  1/5 V, 0/10 V

Current
  0/1 mA, 0/10 mA
  4/20 mA, 10/50 mA

INPUT IMPEDANCE
Voltage
  600 kilohms

Current

Current Input
0/1 mA
0/20 mA
4/20 mA
10/50 mA
Input Shunt Value
1000 OHM
100 OHM
125 OHM
20 OHM

OUTPUT RANGE
Current
  4/20 mA
  Compliance > 12 Per Output at 24 V Power

BANDWIDTH
-3db at 3 Hz

OUTPUT RIPPLE
<0.1% of span
  (peak to peak)

ACCURACY
0.1% of span

LINEARITY
0.05% of span

COMMON MODE REJECTION
100 dB, DC to 60 Hz

ISOLATION, OUTPUT/INPUT/POWER
>500 megohms
1500 VAC rms

OPERATING TEMPERATURE
14F to 158F/-10C to 70C

TEMPERATURE STABILITY
(0.01% of span)/C max

POWER
21 to 28 VDC, 50 mA max