Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter

Mighty Module MM4050 DC Input, Low Input Span Fixed Range, Non-Isolated DC Transmitter


MM4050 DC Input, Low Input Span Fixed Range, Non-Isolated DC Transmitter

Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,TransmitterDescription

The MM4050 provides a DC output voltage or current proportional to a DC input signal. It is useful in converting a voltage to a current, a current to a voltage, or for scaling signal levels from one amplitude to another and for increasing drive capability.

The MM4050 contains a superior input amplifier for narrow span inputs down to 10 mV.

The Module include filtering and conditioning to reduce susceptibility to transients and noisy environments.

Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter Download MM4050 Brochure

Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter Download MM4050 Manual

Features

Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
Provides DC Output Proportional to DC Input
Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
NOT Isolated (for Isolated I/O use MM4310 or MM4380A)
Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
10 mV Minimum Input Span
Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
Unlimited* Choice of Input/Output Ranges
Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
Choice of Power Options
Mighty,Module,MM4050,DC Input,Low Input,Span,Fixed Range,Non,Isolated,DC,Transmitter
10 + 5 Year Warranty

Typical Applications

Use for voltage/current scaling or level conversion, buffering and noise reduction.

Mounting

The module is designed to plug into a standard 8-pin relay socket. Part number MP008 is a molded plastic socket suitable for mounting on a flat surface or in a 2 3/4 inch wide PVC snap track (TRK48). Socket DMP008 is an 8-pin DIN rail mounted socket.  Use CLP-1 (MP008 only) hold-down clip if needed for vibration environments.  A Killark HK Series explosion-proof housing with dome and 8-pin socket is available (HKB-HK2D-8).

Specifications

INPUT RANGE
Voltage
  any range between 10 V max**

Current
  any range between 5A
    (minimum span 1 mA)

INPUT IMPEDANCE
Voltage
  200 kilohms

Current

Input
1 mA
10 mA
20 mA
4/20 mA
100 mA
1 A
5 A
Shunt Value
100 OHM
10 OHM
5 OHM
61.9 OHM
1 OHM
0.1 OHM
0.01 OHM

OUTPUT RANGE
Voltage
  select any range from  -10 V to +15V
  10 mA max load
    (min span 0.2 V)

Current
  select any range from 0 to 50 mA max
    (min span 1 mA)
  24 V compliance***
    18 V compliance for ISO option
    if full scale output >20 mA

RESPONSE TIME
 < = 100 ms
 (range dependent)

ACCURACY
0.1% of span

LINEARITY
0.01% of span

COMMON MODE REJECTION
120 dB, DC to 60 Hz

OUTPUT RIPPLE
<0.1% of span
  (peak to peak)

BREAKDOWN, P0WER/CIRCUITRY
>1500 VAC rms

OPERATING TEMPERATURE
 14F to 140F
-10C to  60C

TEMPERATURE STABILITY
(0.02% of span + 1.3 V)/C max

POWER
115 VAC 10%, 50/60 Hz
  (2.5 W max)

230 VAC 10%, 50/60 Hz
  (2.5 W max)

DC Power Option
  12 VDC
    (limits 10-15 VDC)
    (2.5 W max)
  24 VDC
    (limits 21-32 VDC)
    (2.5 W max)
  Isolation
    DC power supply to input common:
      10 megohms

* Within specified range limits

**  For input values greater than 10 V use MM4380A wide-ranging isolated transmitter.

*** Compliance:  The sum of all voltage drops in the output loop cannot exceed 24V at rated current (1200 ohms 20 mA).


CONNECTIONS
Power AC L1 or DC +
Power AC L2 or DC -
DC Input +
DC Input -
Output +
Output -
PINS
1
3
5
6
7
8