Lifting Magnets From Eclipse Magnetics

Lifting Magnets

Simply hook to your hoist or crane and you're ready to go.
Lifting awkward and heavy loads becomes a one man job.

Ultralift Plus Lifting Magnets

3 safety features for ultra-safe lifting
1. 'Safety Shim' (patented)
For pre-testing any load. Place the 'Safety Shim' on the load with the Ultralift Plus on top. Activate the Ultralift Plus and attempt to lift the load a very short distance. If the Ultralift Plus holds the load with the 'Safety Shim' then a 3:1 safety factor is guaranteed without it. The ability to pre-test any load could be especially useful if you lift loads of differing sizes, materials and surface finishes.

2. Safety catch
When the Ultralift Plus is 'on' the operating handle is held by a safety catch to prevent accidental switching. The safety switch is release by pressing a button on the end of the operating handle.

3. Lifting eye mechanism (patented)
Patented mechanism prevents any switching, accidental or otherwise, of the Ultralift Plus while it is holding a load.
Ultralift Plus Handbook

Ultralift TP Lifting Magnets

Manually operated permanent lifting magnet specifically designed for lifting thin plate and removing single sheets from a stack.

Operating handle works like a car handbrake. A button on the end operates a safety catch which prevents accidental switching while a load is being held.

Simply attach the Ultralift TP to the hook of your crane or hoist and you're ready to go.

Permanent magnets and manual switching mean no operating costs.

A job that takes two men with hooks, chains or slings can be done with one hand using the Ultralift TP. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it's lifted.

Loads can be stored and accessed more efficiently as you only need access to the load's top face to attach the Ultralift TP.
Ultralift TP Lifting Magnet

Ultralift LM Lifting Magnets

• NO RUNNING COSTS No power required – no additional costs.

• EASY TO INSTALL Simply hook to your crane or hoist and you are ready to lift.

• EASY TO USE One man can attach the load, effortlessly, in seconds.

• SAFE LIFTING Safety locking mechanism prevents accidental release of load.

• SPACE-SAVING Access is only required to the load’s top face allowing more efficient use of your storage and handling areas.

• LOAD CARE Load surface not marked.

• HI-PERFORMANCE ‘Rare earth’ neodymium magnet material provides light weight, high power performance.

Ultralift LM Lifting Magnet Handbook

Battery Lifter

The usability of an electro-magnet with the safety of a permanent magnet

• Power only required for switching – lose the power and the load stays held

• Push button or automated switching for fast, easy use

• No installation required – simply attached to the hook of your crane or hoist

• Lift up to 10 tonnes

• Lift round bar, long bar, plates and blocks
  

Battery Lifter

90° Disc & Plate Lifter

Lift and rotate steel discs and plates for positioning and machine loading applications.

Frame with integrated lifting magnet allows you to pick the load from the floor and turn it through 90 degrees for final positioning.

EASE OF USE

Lift and turn in one single operation.

Returning to the pallet is simply the reverse of this movement.

ADJUSTMENT

The magnet position on the frame is adjustable to suit different load diameters.

The lifting point on the frame can also be adjusted to ensure a balanced lift.

SAFETY

A neat handgrip on the frame makes it easy to guide the load to its location.

The lower location pins prevent the load sliding when it is lifted through 90 degrees and allow a lighter and more cost effective magnet to be use.

90° Plate and Disc Lifter pdf