| |
| Soft Start Controls from Can-D Systems |
|
Prevent the wear and tear caused by fast starts. These reliable, reduced voltage controllers will soften the starting speed and help reduce the load swing on overhead cranes. Our Soft Starts are compact & DIN Rail mountable. Available in 1 & 2 speed, in ratings of 1.5 to 20 horsepower, and from 208VAC to 575 VAC, 3phase. Suitable for new or retrofit applications. Soft Start Controls are not recommended for Hoist applications. For Hoist applications, please see CH5 Series of AC Inverters.
|
| |
|
3RW Series Soft Start Controls
|
|
Above: 3 phase styles for motors up to:
25hp @ 200V 60hp @ 460V
30hp @ 230V 75hp @ 575V |
Features & Benefits
 |
Suitable for new or
retrofit applications |
|
Available in single or two speed |
|
Electronic braking and soft stopping |
|
Voltage ramp to handle varying loads |
|
Modular connections save space for wiring |
|
At a glance status display |
|
| |
Precise, progressive control of ramp up time |
|
Accurate control of ramp down time |
|
Signaling of status, ramp up, voltage ramp down |
|
Occupies less panel space |
|
High-density DIN rail assembly and wiring techniques reduces installation time |
|
Control voltage 110VAC to 230VAC |
|
|
|
Typical Applications
AC motor applications where a smooth start and /or stop is required, such as:
| Conveyors |
Fans |
Cranes (traverse only) |
| Compressors |
High inertia loads |
|
Note: Soft stop is not available in reversing or 2 speed applications |
|
| |
|
MCI Series Soft Start Controls
|
|
Above: The adjustable initial torque and the unique breakaway (kick start) function enables the MCI to be optimized for almost any application. |
Features & Benefits
|
Individually adjustable acceleration and deceleration times, 0.5 - 10 seconds |
|
Initial torque is adjustable from 0-85% |
|
Breakaway function (kick start) |
|
Micro-computer controlled for maximum Performance |
|
|
Universal control voltage: 24-480V a.c/d.c |
|
LED status indicator |
|
Built-in varistor protection |
|
Unlimited start/stop operations per hour |
|
IP 20 protection |
|
Compact DIN rail mountable design |
|
|
|
|
|
| |
|
TCI Series Soft Start Controls
|
|
Above: The TCI unit is easy to install between the motor starter and the motor. Features adjustable ramp-up and initial torque. |
Features & Benefits
|
Adjustable ramp-up time from 0.5-5 seconds |
|
Initial torque adjustable from 0-85% |
|
Single and three-phase operation |
|
LED status indicator |
|
|
Built-in varistor protection |
|
Unlimited start/stop operations per hour |
|
IP 20 protection |
|
Compact DIN rail mountable design |
|
Simple hook-up: 3 wires in, 3 wires out |
|
|
|
|
|
