Abanaki,Oil,Skimmers,Industrial,Oil Skimmers

Abanaki Oil Skimmers - Industrial Oil Skimmers

Process Controls Index
Kason Products
K-Tron Products
Sturtevant Products
Abanaki Products
  Abanaki Oil Skimmers - Industrial Oil Skimmers
Abanaki Oil Skimmers - Industrial Oil Skimmers For Every Application
"Click" the image or product name for more information.


Mighty Mini SST

  • Smallest and lightest Abanaki skimmer - weighs about six pounds
  • Easily hand carried to the source of the problem - can fit almost anywhere
  • Oil removal rates up to 2.0 gph
  • Designed for tank depths from 6" to 24" (15.2 cm to 61.0 cm)
  • Belt and tail pulley can fit through a 2" (5.1 cm) diameter bung hole
  • Great for automotive and mobile equipment service shops
  • Very affordable
  • Ask about OEM options
  • Stainless steel construction
  • Integrated 24 hour timer


The Portable Tote-It

  • Lightweight for portability; approximately 36 pounds
  • Can be installed permanently in limited access areas
  • Oil removal rates up to 12 gph (45 lph)
  • Standard length is 5' center to center (10' maximum)
  • For medium duty applications; parts washers, tanks, etc.


Oil Grabber Model 4

  • A single unit elevates and separates oil at a rate up to 20 gph
  • Lifts oil up to 100' without the need of expensive pumps
  • Maintains skimming efficiency with fluctuating fluid level
  • Can be used in depths as shallow as one foot
  • Requires no tank modifications in most applications
  • Operates in turbulent liquid using optional tail pulley cage and tether assembly
  • Easy mounting and fast cleaning, with minimal maintenance


Oil Grabber Model 8

  • Similar to the Model 4 with additional features
  • A single unit elevates and separates oil at a rate up to 40 gph
  • Can be used with a full range of Abanaki options (heater, debris rakes,
    belt and tail pulley tethers, etc.)
  • Saves coolant and conserves wash water
  • Flagship unit of Abanaki's product line


Oil Grabber Model MB

  • Designed for jobs that require high capacity oil removal
  • Each belt increases the removal rate by up to 40 gph
    • 2 x 8 skims 80 gph
    • 3 x 8 skims 120 gph
    • 5 x 8 skims 200 gph
  • Utilizes continuous belts and wipers to remove oil from the fluid surface.


Oil Boss

  • Skims up to 16 gph
  • Completely constructed of Stainless Steel
  • Drive unit is completely covered
  • Comes with a pilot light and on/off selector
  • Easily decontaminated


Grease Grabber

  • Abanaki's most rugged unit
  • Works for both greases and oils
  • Grease removal rates up to 160 gph (606 lph)
  • Designed for extremely demanding environments
  • Suitable for outdoor drainage pits in primary metal mills
  • Optional boom mast mount with swing arm for large pits and tanks
  • Integral 700W heater keeps skimmed grease fluid for easy discharge


PetroXtractor - Well Oil Skimmer

  • Used primarily for groundwater remediation through monitoring and remediation wells
  • Comes in three varieties
    • PX-A for 2" diameter wells (3gph, SAE 30)
    • PX-B for 4" diameter wells (6gph, SAE 30)
    • PX-C for 6" diameter wells (12 gph, SAE 30)
  • Works for LNAPL's and some DNAPL's (coal tar, #6 fuel, etc.)
  • Options include: explosion proof setup, below grade mounting kits, timer, housing
    55 gallon drum shutoff switch and air motors


Oil Concentrator

  • Removes residual water in the skimmed oil
  • Provides virtually complete oil/water separation
  • An optional unit available on all Abanaki oil skimmers
  • Uses no electricity, timers, sensors, pumps, or other moving parts
  • Several sizes to fit any application
  • Optional heater available for high viscosity oils and low temperatures
  • Removable sludge screen and drain plug facilitate routine maintenance
  • All hardware provided for easy mounting to Abanaki skimmer
Q-VAC 100

Q-VAC™ 100

  • Empties coolant from sump
  • Vacuums oil, coolant, and other floor spills
  • Removes surface decontaminates from process baths
  • Empties tanks and drain pits
  • Vacuums containers and vats absolutely dry
  • Minimizes use of absorption materials
  • Fits on a standard 55 gallon, closed top drum
  • Requires no filters
  • Contains no parts to break or replace

Coolant Maintenance Products

  • Mighty Disk™ Oil Skimmer
  • Mighty Mini® SST Oil Skimmer
  • TubeTastic!™ Oil Skimmer
  • Coolescer™ Coolant Refresher
  • Coolant™ Mints
  • Abanaki Aerators

Advantages of Abanaki Products

  1. Belt materials available include corrosion-resistant steel, specially engineered polymer and Elastomer.
  2. Wiper material can be Nitrile, CRV, ceramic impregnated rubber and others.
  3. Most housings utilizes a corrosion-resistant powder coated finish; 316 stainless steel housings may be available.
  4. Abanaki skimmers will perform in a full range of liquid water temperatures, with pH between 1 and 13.
  5. Belt length is specified by the user; some length restrictions apply.
  6. The standard drive on all units is an electric motor and gear reducer. Other drive types available.

Abanaki supplies custom designs and turnkey systems
to meet specific application needs.

Site Design: Process Controls And Instrumentation