Cross-Flo, Static sieve, Static scalping sieves, sieves, Static, scalping, Solids separation, Separate dry solids, Kason

Cross-Flo Static Scalping Sieve from Kason

Process Controls Index
General
Kason Products
K-Tron Products
Sturtevant Products
Abanaki Products
  Cross-Flo Static Scalping Sieve from Kason

Cross-Flo Static Scalping Sieve

Scalps coarse, free-flowing dry solids at ultra high rates


Cross-Flo, Static sieve, Static scalping sieves, sieves, Static, scalping, Solids separation, Separate dry solids, KasonThe CROSS-FLO static sieve continuously removes oversize particles from coarse, free-flowing, dry bulk solids at rates to 100 tons (91 metric tons) per hour. The fixed-slope, heavy-duty, permanent bar screen is offered with apertures from .25" to 3" (6mm to 76mm). Because the sieve requires no electrical drive or screen changes, initial cost and operational cost are low. Standard units are available in widths from 2 to 6 (610mm to 1830mm) in 1 (305mm) increments, with larger sizes available on a custom basis.






Site Design: Process Controls And Instrumentation