Industrial Descaling Solutions From DYNAMIC DESCALER®

Industrial Descaling Solutions From DYNAMIC DESCALER®

Below are general guidelines for how to use DYNAMIC DESCALER® on the following types of equipment:

  • Air Compressors

  • Cooling Towers and Closed Circuit Cooling

  • Heat Exchangers

  • Vacuum Pumps

Specific application may differ depending on the specific equipment, layout, and other factors. Contact us if you have any questions on how to most effectively use DYNAMIC DESCALER® on your equipment.

Air Compressors

A reciprocating air compressor is normally a heavy-duty, continuous service compressor. Cylinder construction usually incorporates a water jacketed cylinder and water jacketed heads to remove some of the heat of compression and also to improve the lubrication and reduce carbonization of valve parts. Water jacketing around valve and packing is essential, since these are points of localized heating.

As time goes on, you will have lime, water scale and rust accumulation inside the water jackets, which in time, will overheat the air compressor. This will also occur in the intercooler and aftercooler. With DYNAMIC DESCALER®lime, water scale, rust remover you can clean these vital parts, without disassembling the cylinders, aftercooler, and the intercooler. Just simply remove the water in/out connection from each part and circulate DYNAMIC DESCALER®for the recommended amount of time. After the circulation, flush with water and connect the water in/out connections back to the proper location.

If your compressor is running off a closed loop water system or a cooling tower, you may want to pour the DYNAMIC DESCALER® into one of these systems. This will eliminate the downtime in your plant operation versus disconnecting your in/out connections from each vital part.

For the proper amount of DYNAMIC DESCALER® and circulation times, << Learn More >> for instructions, including a quantities reference chart.

For proper quantity and circulating times to run DYNAMIC DESCALER® through the cooling tower or closed loop water system to clean the compressor, (without shutting down plant operations), please contact us.

Cooling Towers & Closed Circuit Cooling

DYNAMIC DESCALER® Water Scale, Lime, Rust, Dirt Remover used in the cleaning of cooling towers and closed circuit water cooling systems is most usually accomplished while the water cooled equipment is online and without the necessity of shut-down. In order to dissolve all water scale, lime, rust and dirt from the waterside of your equipment, it is imperative that these instructions are followed.

<< Learn More >> for instructions on cleaning cooling towers and closed circuit cooling with Dynamic Descaler® .

Heat Exchangers

Descaling Solutions, Dynamic Descaler&reg;, Biodegradable DescalerHeat exchangers in many manufacturing facilities are very crucial in everyday operations. Heat exchangers are designed to transfer heat in the form of kinetic energy from one liquid to another. And while transferring heat, the heat exchanger, over a period of time will collect lime, scale and rust on the waterside of the exchanger.

With DYNAMIC DESCALER®, you do not have to dismantle or remove the unit from your operations. You may want to install a system, which will inject DYNAMIC DESCALER® into your water supply on a regular basis for your cooling tower, chiller, or your closed loop water system. This procedure will eliminate downtime in your everyday operations while cleaning out your exchanger.

<< Learn More >> for instructions on cleaning heat exchangers with DYNAMIC DESCALER®.

Vacuum Pumps

Descaling Solutions, Dynamic Descaler&reg;, Biodegradable DescalerFor instructions on how to remove water scale, lime, mud and rust from the casting, rotor, hub, cones and associated piping of your vacuum pumps,
<< Learn More >>.

There are several formulations for chemical descaling in addition to DYNAMIC DESCALER®. We take pride in the fact that we believe to have one of the lowest rates of corrosion, highest standard of product safety to personnel and equipment, as well as fastest rates of scale removal and greatest longevity of product at the lowest price than any competitor world-wide.

Some competitors claim that their product, while containing HCl, is safe to use on stainless steel. Nothing could be further from the truth. Any HCl based product will create on stainless steel corrosion stress cracking over time, also known as hydrogen embrittlement. We have on record many customers who have used some competitive products who have found this out the difficult way with damaged equipment.

For stainless steel descaling, we have developed a product called DESCALE 518 which is as effective as the standard DYNAMIC DESCALER® but a a slightly higher cost. Notably, some competitors are still more costly with their HCl based product. DESCALE 518 contains NO HCl and is specifically designed for use on stainless steel.

If there are any questions in your particular application as to whether you should use the standard DYNAMIC DESCALER® or, DESCALE 518, please contact us.


Dynamic Descaler, Biodegradable Descaler
The World's Safest Biodegradable Descaler


About Us

Dynamic Descaler® is the trade name for a revolutionary liquid descaler that rapidly dissolves all water scale and lime plus it removes mud, rust, and other non-soluble sedimentation deposits safely and effectively. We also provide other descalers Descale 518 and Aqua Safe descaler for potable water applications.

Sitemap

Dynamic Descaler®

Dynamic Descaler® is used worldwide by leading companies in the following sectors: Industrial, Marine, Light Industrial. Descale 518 can be used on steel, iron, brass, copper, plastic and rubber. Ideal for holding tanks, reservoirs, heat exchangers & other stainless steel equipment. Aqua Safe effectively removes water scale and mussels from marine equipment on all types of vessels.

Sample Content

Dynamic Descaler® provides indepth information of their complete product line. Dynamic Descaler® a revolutionary environmentally friendly liquid descaler. Descale 518 the safe and effective way to remove water scale on stainless steel, aluminium and galvanized metals. Aqua Safe is ideal for water heat exchangers, tankless hot water heaters, coolers, pumps, boilers, compressors, condensors, extruders, molds, cooling towers, furnaces, water piping systems and other water side heat exchange surfaces.

Get in Touch