Rust Removal From Vacuum Pumps
- Water Scale Removal, Lime Scale Removal

Vacuum Pumps - Rust Removal, Water Scale Removal, Lime Removal

In order to remove water scale, lime, mud and rust from the casting, rotor, hub, cones and associated piping of your equipment, the following steps should be used.

Rust Removal, Water Scale Removal, Lime Removal, Vacuum Pumps

Instructions for Dynamic Descaler® Cleaning

1. Write down the “before” amperage readings, CFM at vacuum capacity and the vacuum in inches of mercury.

2. Take the unit out of service.

3. Remove the bottom drain plug and allow all water to drain from the pump casing. Replace bottom plug after the unit is drained.

4. Break seal on water piping and attach a pumping discharge hose.

5. Remove top plug and attach return hose between there and the recirculating bucket.

6. Insert “blanks” in flanges of discharge and suction piping.

7. Add prescribed quantity of Dynamic Descaler® into the circulation loop.

8. In some instances, additional water may be required to maintain circulation.

9. Tighten vacuum pump and seal packing to minimize leakage.

10. After 15 minutes of Dynamic Descaler® circulation, turn pump rotor 90 degrees by pulling on the drive belts or jacketing the starter switch.

11. Every 15 minutes thereafter, turn rotor 90 degrees to assure a thorough cleaning of interior part of you pump, including hub and rotor.

12. Continue the circulation of Dynamic Descaler® for at least two hours or until the foaming stops. Lack of foam indicated depleted or clean equipment.

13. After several hours of circulation time, with intermittent turning of the rotor, the pump should be clean and rotor should turn freely.

14. Shut off the circulating pump and add flush water to the recirculation bucket.

Download Brochure

Dynamic Descaler, Biodegradable Descaler
The World's Safest Biodegradable Descaler

About Us

Dynamic Descaler® is the trade name for a revolutionary liquid descaler that rapidly dissolves all water scale and lime plus it removes mud, rust, and other non-soluble sedimentation deposits safely and effectively. We also provide other descalers Descale 518 and Aqua Safe descaler for potable water applications.


Dynamic Descaler®

Dynamic Descaler® is used worldwide by leading companies in the following sectors: Industrial, Marine, Light Industrial. Descale 518 can be used on steel, iron, brass, copper, plastic and rubber. Ideal for holding tanks, reservoirs, heat exchangers & other stainless steel equipment. Aqua Safe effectively removes water scale and mussels from marine equipment on all types of vessels.

Sample Content

Dynamic Descaler® provides indepth information of their complete product line. Dynamic Descaler® a revolutionary environmentally friendly liquid descaler. Descale 518 the safe and effective way to remove water scale on stainless steel, aluminium and galvanized metals. Aqua Safe is ideal for water heat exchangers, tankless hot water heaters, coolers, pumps, boilers, compressors, condensors, extruders, molds, cooling towers, furnaces, water piping systems and other water side heat exchange surfaces.

Get in Touch