Ion Air Blower From HAUG North America

Ion Air Blower, Haug, North AmericaIon Air Blower

HAUG’s Ion-Air blower IB is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air flow hence becomes conductive and is able to eliminate electrostatic surface charges on non-conductive material.

Low Operating Costs

The Ion-Air blower operates on a low pressure principle and does not require costly compressed air. The power supply, which is required to feed the ionzing bar with high voltage, also operates on a low energy consumption level. This makes the Ion-Air blower a very efficient ionizing system, especially for applications where constant ionization is required.


  • on winding and unwinding systems (especially films and foil)
  • on injection moulds and their handling systems
  • in the production of circuit boards
  • in the electronic industry
  • in the plastics and packaging industry

Increasing The Effective Length

The Ion-Air blower becomes very flexible when a larger operating length is required. Several units can be “daisy-chained” in series. In this case, only one ionizing bar and one power pack is required (other lengths are also available on request).

Technical data

Types IB 115 V
230 V
Order-No.: 04.0350.000
Order-No.: 04.0351.000
Length 457 mm, 2,7 kg
max. bar length 380 mm
IB 115 V
230 V
Order-No.: 04.0350.001
Order-No.: 04.0351.001
Length 813 mm, 3,6 kg
max. bar length 780 mm
IB 115 V
230 V
Order-No.: 04.0350.002
Order-No.: 04.0351.002
Length 1549 mm, 7,0 kg
max. bar length 1510 mm
without power pack, without HV-cable, without ionizing bar (round version)

Unit with 2 retaining holders, adjustable screws and base
Dimensions (H x W) 95 x 105 mm (H x W)
Supply voltage 115 V~ / 230 V~ (50–60 Hz)
Power consumption 70 VA (Length 457 mm)
150 VA (Length 813 mm)
220 VA (Length 1549 mm)
Operating temperature +5 °C to +50 °C
Storage/transport temperature -15 °C to +60 °C

Subject to technical changes!


Bracket links Order-No.: X-3312
Bracket rechts Order-No.: X-3313

Suitable Power packs

Connectable lengths
(ionizing unit incl.
high-voltage cable)
EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m


HAUG Static Control Products And Solutions For Industry

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.


Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7