Nex Flow Products
Site Search Engine
Static Eliminator Bar EI-RN (Ionizing Bar)
From Haug North America
The HAUG EI RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively – even at high operating speeds.
The coaxial high-voltage plug-and-socket connection of the HAUG systemX-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.
The round construction of the EI RN ionizing bar permits the exact axial adjustment in the direction of travel of the material. The ionizing bar is safe to touch. Special wear-resistant electrodes guarantee long service life.
How They Work
Further Bar Types Are Available
- EI RNE as EI RN, but with high-voltage connection at the end of the bar for series connection of ionizing units.
- EI RA without HV-cable, suitable for connection of a flexible, separate high-voltage cable (type VK-Norm, VK-ATL a.o.)
- EI RAE, as EI RA but with high-voltage connection at the end of the bar for series connection of ionizing units.
HAUG ionizing bars are used with machines in the packaging, film, printing and textile industries, as well as for many other industrial applications. It is recommended that two ionizing bars be installed above and below the material web.
The ionizing bar EI RN is suitable for feed speeds ≤ 100 m/min.
to the bar
for series connection
of ionizing units
for connection of
a highly flexible,
detachable HV-connection cable
as EI RA, for series
connection of ionizing units
|Diameter||18 mm /20 mm|
|Length||from 150 to 4.500 mm lieferbar.
Other lengths on request.
|Operating temperature||+5°C to +45°C|
|Storage/transport temperature||-15°C to +60°C|
|Optimum effective distance||20 – 30 mm|
|Effective length||Bar length - 100 mm|
|Smallest bending radius (cable)||R 50|
Subject to technical changes!
Effective field: 20 - 30 mm = optimum effective distance
Min. bending radius R50
Cable length ± 50 (customer specification), Bar length ± 5 (customer specification)
Effective length = bar length - 100 mm
|Bar holder ”Klick Zack”||Order-No.: 10.0004.000|
|Bar holder, bloc, half open||Order-No.: 10.0301.000|
|Bar holder||Order-No.: 10.0227.000|
|Clamping holder, 2 parts||Order-No.: 10.0268.000|
|Angle, large||Order-No.: X-0404|
Suitable Power Packs
(ionizing unit incl.
|EN SL||max. 5 m|
|EN SL LC / EN SL RLC||max. 10 m|
|EN 8 / EN 8 LC||max. 18 m|
|Multistat||max. 18 m|
|EN 70 / EN 70 LC||max. 2 x 18 m|
Ionizing Bar - HAUG EI RN Drawings: