Nex Flow Products
Site Search Engine
HAUG Multicheck Model 80301 Static Meter
Multicheck Model 80301 - tests if static bars and power supplies are working. Quantitative performance testing. The high-voltage test unit Multicheck Model 80301 is a performance testing unit for HAUG or other power packs and for HAUG ionization units. Unlike cheap AC Testers which only show if power is going into power supplies or static bars, the Multicheck actually indicates if a power supply or bar is working. As you get close to the static bar, or power supply, a red light goes on indicating power to the unit, then if there is adequate voltage to make the system work, the light goes green. A minimum voltage of 3600 volts is required to insure that a static elimination system is working. The Multicheck light will turn green if you have that voltage. AC Testers will NOT do this and are not an adequate indicator so be wary of marketing ploys which may offer AC testers at inflated prices.
For testing power packs, the red measuring probe is inserted into the high-voltage socket as far as it will go. After pressing the red push button the LED will illuminate green if the unit functions correctly. In case of malfunction, the LED will illuminate in red or no display at all is visible.
For testing ionizing units the test unit is moved vertically towards the ionizing tips. The LED will flash red; when the probe makes contact, the LED will illuminate in green if the ionizing unit functions correctly.
Hand Held Static Meter Model 80302 - used to indicate static charge on parts, sheets and webs.
The Hand Held "Static Control" Meter is reasonably priced and easy to handle. It is operated using an ON/OFF soft key (with circuit-breaker) and two further soft keys for the 0-100 and 0-1000 kV/m measuring ranges. The meter is battery powered. It should be part of any basic equipment of every electrical engineering workshop. It is rugged and durable for use in all types of plant operations.
Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.
Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.
REPAIRABLE POWER SUPPLIES - almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.
HAUG Static Control Products And Solutions For Industry