Adjustable Air Amplifier With Gauged Markings
from Nex Flow


Adjustable Air Amplifier from Nex Flow™ with gauged markings are used for a variety of applications - available in anodized aluminum and marked to accurately set the gap from 0 to 1.5 mm.

Adjustable Air Amplifier with gauged markings are easy to mount and maintain. Compressed air consumption and noise levels are reduced.

Adjustable Air Amplifier with gauged markings take energy from a small volume of compressed air to produce high velocity, high volume, low pressure output airflow.

Adjustable Air Amplifier with gauged markings is quiet, efficient and can amplify flows up to 16 times the input air consumption rate.

 

Adjustable Air Amplifier, Gauged Markings, Adjustable, Air, Amplifier, Nex FlowAir Booster and Air Pressure Amplifiers:

An Air Amplifier with gauged marking is an Air Booster. They convert pressure to flow and are “flow” amplifiers. They are NOT Air Pressure Amplifiers.

Dust Collection System and Vent Smoke and Fumes:

Air amplifiers have been used as a dust collection system and to vent smoke and fumes from all types of equipment.

Dry Air Coolers:

Air amplifiers can be used as dry air coolers by blowing amplified airflow onto tubes of hot gas (normally air) to cool them.

Part Ejection System and Chip Removal System and Part Drying System:

Air Jets and Air Nozzles are excellent as a Part Ejection System, Chip Removal System and as a Part Drying System when air knives or amplifiers are not suitable.

 

 

info request button
 

 

Adjustable Air Amplifier - How It Works


Adjustable Air Amplifier, Gauged Markings, Adjustable, Air, Amplifier, Nex FlowA large volume of surrounding air is induced into the amplifier at point (A) by the action of a small amount of compressed air which enters the annular chamber at point (B) that is then throttled through a small ring nozzle at high velocity and into the inside of the amplifier over a coanda profile. The compressed air stream clings to the coanda profile as it enters the inside walls of the amplifier and thereby creating a vacuum that induces the outside air converting the pressure into amplified airflow. The amplified of airflow leaves at the exit at point (C). Airflow is further amplified downstream at point (D) by entraining additional air from the surroundings at the exit.

(A) AIR INDUCTION POINT
(
B) ANNULAR AIR COLLECTION CHAMBER
(D) EXIT POINT
(D) DOWNSTREAM

Compressed Air Consumption
(Based on gap of 0.002" (.05mm)) Consumption in SCFM. (SLPM)

Inlet Pressure
40001G
40002G
20 PSIG
(1.4 BAR)
4.5
(127.4)
8.0
(226.5)
40 PSIG
(2.8 BAR)
7.5
(212.4)
12.0
(339.8)
60 PSIG
(4.1 BAR)
10.3
(291.7)
16.5
(567.2)
80 PSIG
(5.5 BAR)
12.5
(354.0)
21.5
(608.8)
100 PSIG
(6.4 BAR)
14.0
(396.4)
26.0
(736.2)
120 PSIG
(8.4 BAR)
17.5
(495.5)
30.0
(849.5)

Adjustable Air Amplifier Mounting Brackets

Adjustable Air Amplifier mounting brackets allow for easy mounting. Available for the 1-1/4” and 2” sizes. Made in Stainless Steel


PART NO DESCRIPTION

40001MTS Mounting bracket for 40001, 40001G and 40001S
40002MTS Mounting bracket for 40002, 40002G and 40002S

Adjustable Air Amplifier Ducting
Both the inlet (vacuum intake) and discharge ends may be ducted for light material and fume conveying applications. Care must be taken to avoid unnecessary restrictions that will cause back pressure or suction resistance that will reduce performance levels. Keep back pressure and resistance to under 2" of water column.

Adjustable Air Amplifier Applications
Replace fans, used for blow-off, cleaning, drying, cooling and conveying.

  • Automotive:
    Remove water, coolant, dust, and scrap in parts manufacturing/assembly operations. Cool enamel and water based paints in parts manufacturing, auto body shops or assembly lines.

  • Bottling:
    Blow off of water from the tops of cans, bottles prior to labeling, ink jetting, palletizing or packaging. Conveying light materials.

  • Chemicals:
    Blow off of chemicals or water prior to labeling or packaging.

  • Food:
    Remove water from product or packaging.

  • General Manufacturing:
    Part ejection, fume removal, dust and liquid blow off from all types of parts, conveying away waste, ideal for replacing fans in some cooling operations such as tempering glass.

  • Metals:
    Coolant and other liquid removal on process lines from Aluminum, Steel, Brass or other materials. Dry metals prior to other operations such as plating or polishing. Cool metal parts prior to coating or painting. Coolant mist removal. Boost vacuum systems to remove grinding dust. Cool steel forgings.

  • Paper & Lumber:
    Sawdust removal and control by boosting the vacuum system, dust removal. Trim removal in converting applications.

  • Plastic:
    Dust and scrap blow off. Cool moldings after extrusion, then blow off and dry prior to forming.

  • Printing:
    Cooling to set some inks, scrap blow off.

  • Pharmaceutical:
    Remove liquid prior to labeling or packaging waste removal for solid materials. Extract unfilled capsules by vacuum as they pass on a conveyor.

  • Textile:
    Scrap and trim removal on textiles to eliminate expensive vacuum systems.

Adjustable Air Amplifier With Gauged Markings Specifications

Constructed of anodized aluminum with two standard outlets (outside) diameters: 1-1/4" (31mm), 2" (51mm).

Come standard with a .002" (.05mm) gap. If greater air force is required, the gap is adjustable from 0 to1.5mm and easily set using the markings on the air amplifier and held in place after setting with a lock ring.

Adjustable Air Amplifier With Gauged Markings Ratios (approx.)
Model 40001G: 15:1
Model 40002G: 16:1

Outside Diameter
Of Outlet
Model
Dimensions (inches)
     
A
B
C
D
E
F
G
H
NPT*
1-1/4"
40001G
in
2.0
1.25
1.0
.98
1.38
1.88
2.88
1/4"
18 NPT
0
0
mm
50.8
31.8
25.4
24.9
35
47.8
73.2
   
2"
40002G
in
3.0
2.0
1.06
1.64
1.5
2.25
3.25
3/8"
18 NPT
0
0
mm
76.2
50.8
26.9
41.7
38
57.2
82.6
   
* BSP Adapters Supplied Upon Request Free Of Charge

Adjustable,Air,Amplifier

Compressed Air Solutions To Meet Your Application Needs

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.

Sitemap

Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
    sales@nex-flow.com
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7