Air Mag™ Star Profile Air Nozzle From Nex Flow™ Air Products Corp.

Air Mag™ Star Profile Air Nozzle

The Nex Flow™ Air Mag™ Star Profile “patent pending” star profile air amplifying nozzle has the best force/air consumption ratio known.

Ideal when higher force required in blowoff applications.

Air Mag™ Star Profile Air Nozzle Model 47004AMF

The first product of the Nex Flow™ Air Mag™ Star Profile “patent pending” star profile air amplifying nozzle and has the best force/air consumption ratio known. Ideal when higher force required in blowoff applications.

Sound Level 74 dBA at 3 ft. (0,91m) at 80 psig (5.5 bar)

How They Work

Air Mag™ Nozzle Model 47004AMF – Compressed air enters at point (A). Surrounding air (B) is entrained over the specially designed surface profile as the small amount of compressed air exits the specially designed holes drilled in the nozzle and combines at (C) to form a concentrated high velocity, laminar flow stream of amplified air flow and concentrated force with very high ratio of force/cfm.

Force Efficiency Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF To Competitive Versions

Note: Data for Force measured at 6” . Data measurement was done at a college test laboratory utilizing accurate force and flow measurement equipment. All nozzles tested under the same conditions. Published data was not used – only actual measurements made in the lab.

Performance Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF

Air Mag™ 1/4" Star Profile Air Nozzle - Model 47004AMF
INLET PRESSURE PSIG
(BAR)
20
(1.4)
40
(2.8)
60
(4.1)
80
(5.5)
100
(6.9)
120
(8.3)
FORCE LBS
(GRAMS)
0.247
(112)
0.474
(215)
0.705
(320)
0.937
(425)
1.172
(532)
1.143
(519)
AIR CONSUMPTION SCFM
(SLPM)
5.5
(156)
9.0
(255)
12.0
(340)
15.5
(439)
19.7
(558)
23.4
(663)

How To Prove For Yourself How Good An Air Nozzle Is

The Nex Flow™ Air Mag™ Air Nozzle is designed so that the force at a particular pressure will be the same as a competitive nozzle of star profile design. To compare and prove the superiority of the Nex Flow™ Air Mag™ Air Nozzle it is easy. Simply replace the other nozzle and see what happens. To do this, have a pressure regulator and gauge upstream and if possible a flow meter upstream. Either have a scale to blow against or just apply it your particular application. For each nozzle, adjust the pressure upstream to that it is the same for all nozzles tested.

This is what you can expect…..

If you replace any competitive nozzle, you will probably have to cut back the pressure as you will get more force from the Nex Flow™ Air Mag™ Air Nozzle. This is because the air consumption is “less” at any given pressure which also means less pressure drop in the line as the air flows out through the nozzle. So you will actually be getting a bit more pressure and force as a result. You can then cut back the pressure if not needed thereby reducing compressed air use even more.

If you have a flow meter, all nozzles can be tested comparatively.

Alternatively, you can just try the various nozzles and you will find the Nex Flow™ Air Mag™ Air Nozzle to perform better simply because there is less pressure drop since it uses less compressed air, indicating its greater efficiency.

Applications Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF

  • Part cleaning especially when higher force needed

  • Heavy Chip removal

  • Part drying

  • Liquid blowoff

  • Material conveying

  • Part ejection

  • Air assist


Air Nozzles Brochure - 1.25 MB

Air Mag Air Nozzles Brochure

Price List

Air Mag™ Star Profile Air Nozzle Model 47004AMF Product Drawings

 

info request button

 

Compressed Air Solutions To Meet Your Application Needs

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.

Sitemap

Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
    sales@nex-flow.com
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7