Nex Flow Products
Site Search Engine
Static Elimination: Eliminate Static And Blowoff Dust With Ionized Compressed Air
Achieve static elimination with the Silent X-Stream Air-Blade Air Knife Ionizer from Nex Flow. Easily eliminate static and blowoff dust with ionized compressed air with an air knife ionizer. The Silent X-Stream Air-Blade Air Knife Ionizer provides increased efficiency and very low noise levels compared to the Standard Air Blade Air Knife Ionizer for static elimination. Both units utilize the quality Haug static bars, the RN bar for most applications or the extra strong VS bars (Triple X versions) for very haigh static charges and extremely high speeds.
Static elimination is achieved with the Silent X-Stream Air-Blade Air Knife Ionizer which uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate static charges in applications where static bars cannot reach or where high speeds are a factor.
Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.
All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).
Static Elimination: Silent X-Stream Air-Blade Ionizer Static Benefits:
Static Elimination: Silent X-Stream Air Blade Ionizer Static How It Works:
Compressed air enters at the rear (or end) ports at (A) of the X-stream Air Blade (B). (See X-stream Air Blade for a description of its operation). Entrained air follows the specially designed profile of the air knife flowing over the ionizing (static) bar (C) creating a fine sheet of ionized air along the entire length of the Air Blade ionizer at it leaves the air knife at point (D). The amplified air stream maximizes velocity and force and provides a well-defined sheet of ionized laminar flow for reduced energy use in the blow off of statically charged surfaces and to remove static at long distances from the assembly. For highly charged surfaces a stronger static bar is available (Triple X Air Blade ionizers).
Typical applications replace expensive, high maintenance ionizing blower systems and are particularly advantageous in intermittent applications.