1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Models 30002/30002S are made of aluminum or stainless steel has virtually no moving parts, conveys air at high rates and long distances. Utilizing compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances.

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Models 30002/30002S available in both coated aluminum or high temperature stainless steel. Simply clamp a standard hose size to each end of the Ring-Vac™ to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.

The Ring-Vac™ Pneumatic Air Conveyor System is available in 3/4"(19mm) 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm) and 3” (76mm) sizes. Any size beyond that can be prohibitive for most applications due to high compressed air requirements.

In addition, beyond 3", the vacuum ability begins to drop significantly except for highly intermittent applications. For applications beyond 2", a blower system often becomes far more economical except in a rare number of possible applications. However, larger size versions are available if required as well as special sizes.

 

 

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Product Drawings:

Aluminum Ring Vac Stainless Steel Ring Vac Mounting Brakets
30002.dwg 30002S.dwg 1.25_RV.dwg
30002.pdf 30002S.pdf 1.25_RV.pdf
30002_3D.PDF 30002S_3D.PDF  
30002_Mod.igs 30002S_Mod.igs  

How The 1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Works


Compressed air enters at point (A) into a annular plenum chamber and injected into the throat of the unit though directed nozzles. These jets of compressed air create a vacuum at the inlet (C) which draws in material and accelerates it through the unit and out at (D) conveying the material over a great vertical or horizontal distance.

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Features

  • Made of an coated aluminum body with no moving parts. High temperature stainless steel models are available for high temperature and corrosive applications.

  • Standard sizes to fit standard hose diameter for easy clamping. Threaded versions connect easily to regular pipe thread: 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm). Special sizes can be manufactured if required.

  • Utilizing a pressure regulator will control the flow material.

  • Instant ON/OFF with no moving parts, no electricity or explosion hazard.

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Benefits

  • Longer life in difficult environments
    than competitive models.

  • Ease of use.

  • Simple and easy control of material flow.

  • Maintenance free operation.

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Applications

Typical applications replace expensive, high maintenance blower systems and are particularly advantageous in intermittent applications.

  • Automotive
    Convey all sorts of items from ball bearings, screws, metal and plastic parts from machinery, moulding machines in manufacturing and in assembly operations.

  • Bottling
    Loading and conveying caps in bottle filling lines.

  • Food
    Convey caps, small items including food items from cheese bits to dried food. Fill or empty packaging material in shipping.

  • General Manufacturing
    Convey all sorts of items from ball bearings, screws, metal and plastic parts. Replace costly blower systems, especially in intermittent applications.

  • Paper
    Trim removal in paper production.

  • Plastic
    Trim removal in converting applications.

  • Printing
    Waste trim removal in printing applications.

  • Pharmaceutical
    Convey pills, capsules, and tablets.

  • Textile
    Thread conveying.

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Dimensions

MODEL
(Aluminum
& High Temperature Stainless Steel)
A
B
C
D
E
F
G
H
I
J
K
L*
30002
30002S
1.25”
(31.8)
1.38”
(35.1)
1.50”
(38.1)
4.875”
(124)
2.5”
(63.5)
1.00
25.4
2.38”
(60.3)
0.78”
(19.7)
0.38”
(9.5)
0.94”
(23.8)
1.75”
(44.5)
1/4" NPT
* BSP Adapters supplied upon request free of charge.

Air Conveyors, Ring-Vac, Pneumatic, Conveying, System, Air, Conveyor
Top View

 


Series 30001 - 30004 (Aluminum)
Series 30001 - 30004 (Stainless Steel)

Air Conveyors, Ring-Vac, Pneumatic, Conveying, System, Air, Conveyor
Side View
Series 30001T - 30004T (Threaded Aluminum)
Series 30001TS - 30004TS (Threaded Stainless Steel)

Air Conveyors, Ring-Vac, Pneumatic, Conveying, System, Air, Conveyor
Side View

 

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor System Performance

MODEL
Size Outside Diameter
inches (mm)
Air Consumption
SCFM at 80 PSIG
(SLDP at 5.5 BAR)
Vacuum
inches H2O (KPG)
30002
30002S
1 1/4 "
(32mm)
26
(730)
-42
(-11)

 

1-1/4 Inch Ring-Vac™ Pneumatic Air Conveyor SystemSpecifications

Air Conveyors - Ring-Vac™ Pneumatic Conveying Systems are available in coated aluminum, stainless steel and in high temperature stainless steel for high temperature applications.

Note: All our stainless steel high temperature Ring-Vac units are rated to 1200ºF (649ºC)

Special materials can be utilized for unique applications. If greater conveying force is required the conveying “generator” can be machined for higher capacities.

Outside Diameter
(Dimension "A" Hose Diameter)
Model Number
Material of Construction
1-1/4"
30002
Aluminum
1-1/4"
30002S
Stainless Steel

NPT Adapters Available Upon Request

Back To Air Operated Conveyors

 

info request button

Compressed Air Solutions To Meet Your Application Needs

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.

Sitemap

Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
    sales@nex-flow.com
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7