1-1/4 Inch Heavy Duty Air Conveyor System composed of the Nex Flow X-Stream Ring-Vac Air Conveyors Models 30002X / 30002XT (XT model is threaded) with virtually no moving parts, conveys air at high rates and long distances even greater than the standard units. In addition they are hard anodized to handle abrasive materials for longer life. Utilizing compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over very large distances.
1-1/4 Inch Heavy Duty Air Conveyor System is made of hard anodized aluminum which is harder than stainless steel. Simply clamp a standard hose size to each end of the Ring-Vac to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.
Heavy Duty Air Conveyor System is composed of the Nex Flow X-Stream Ring-Vac Air Conveyors are available in 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm) and 2" (51mm) sizes. Any size beyond that can be prohibitive for most applications due to high compressed air requirements.
In addition, beyond 2", the vacuum ability begins to drop significantly except for highly intermittent applications. For applications beyond 2", a blower system often becomes far more economical except in a rare number of possible applications. However, larger size versions are available if required as well as special sizes.
I Inch Heavy Duty Air Conveyor System Downloads:
Compressed air enters at point (A) into a annular plenum chamber and injected into the throat of the unit though directed nozzles. These jets of compressed air create a vacuum at the inlet (C) which draws in material and accelerates it through the unit and out at (D) conveying the material over a great vertical or horizontal distance.
1-1/4 Inch Ring-Vac Heavy Duty Air Conveyor System Features:
1-1/4 Inch Ring-Vac Heavy Duty Air Conveyor System Benefits:
1-1/4 Inch Heavy Duty Air Conveyor System Applications
Typical applications replace expensive, high maintenance blower systems and are particularly advantageous in intermittent applications.
1-1/4 Inch Heavy Duty Air Conveyor System Dimensions
* BSP Adapters supplied upon request free of charge.
1-1/4 Inch Heavy Duty Air Conveyor System Performance
1-1/4 Inch Heavy Duty Air Conveyor System Specifications
Pneumatic Conveying System - Heavy Duty X-Stream Ring-Vac - Air Conveyors are available in hard anodized aluminum to handle abrasive materials and boosted in performance over standard Ring Vacs to convey over much greater distances both vertically and horizontally.
Special materials can be utilized for unique applications. If greater conveying force is required the conveying generator can be machined for higher capacities.
NPT Adapters Available Upon Request