The Frigid-X Small Enclosure Cooler or Box Cooler is used for cooling small enclosures for laboratory use, environmental chambers and any application where an enclosure needs cooling (Note: Not approved for electrical and electronic control panels but may be used if approvals not required).
This low cost Small Enclosure Box Cooler utilizes a stainless steel vortex tube with an adjustable hot end to control the temperature produced in the enclosure. In the package are all the necessary items to attach the vortex tube along with a separate venting unit to exhaust the hot air being displaced inside the enclosure.
An optional hose distribution kit is available to distribute the cold air inside for larger enclosures.
Also available is an optional solenoid and thermostat for on-off control.
Frigid-X Small Enclosure Cooler - Box Cooler Advantages:
Frigid-X Small Enclosure Cooler Box Cooler List Of Parts:
How The Small Enclosure Cooler Works
Compressed air enters at point (A) into the vortex tube.The vortex tube splits the compressed air into a hot (B) & cold (C ) stream of air. The hot air from the vortex tube is vented to the atmosphere at point (D). Hot air displaced from the box is vented out through the breather cap (E). Cold air enters the box at point (F) or via an optional hose distribution kit (G).
Frigid-X Small Enclosure Cooler - Box Cooler Systems:
Box Cooler with Hand Adjustable Hot End Cooler
Box Cooler without Hand Adjustable Hot End Cooler