Nex Flow Products
Site Search Engine
Static Testing Products From Nex Flow
Multicheck Model 80301
Multicheck Model 80301 tests if static bars and power supplies are working. The high-voltage test unit Multicheck Model 80301 is a performance testing unit for HAUG or other power packs and for HAUG ionization units. Unlike cheap AC Testers which only show if power is going into power supplies or static bars, the Multicheck actually indicates if a power supply or bar is working. As you get close to the static bar, or power supply, a red light goes on indicating power to the unit, then if there is adequate voltage to make the system work, the light goes green. A minimum voltage of 3600 volts is required to insure that a static elimination system is working. The Multicheck light will turn green if you have that voltage. AC Testers will NOT do this and are not an adequate indicator so be wary of marketing ploys which may offer AC testers at inflated prices.
For testing power packs, the red measuring probe is inserted into the high-voltage socket as far as it will go. After pressing the red push button the LED will illuminate green if the unit functions correctly. In case of malfunction, the LED will illuminate in red or no display at all is visible.
For testing ionizing units the test unit is moved vertically towards the ionizing tips. The LED will flash red; when the probe makes contact, the LED will illuminate in green if the ionizing unit functions correctly.
Static Testing Products Brochure
Hand Held Static Meter Model 80302
Model 80302 Hand Held Static Meter is used to indicate static charge on parts, sheets and webs.
The Hand Held "Static Control" Meter is reasonably priced and easy to handle. It is operated using an ON/OFF soft key (with circuit-breaker) and two further soft keys for the 0-100 and 0-1000 kV/m measuring ranges. The meter is battery powered. It should be part of any basic equipment of every electrical engineering workshop. It is rugged and durable for use in all types of plant operations.
Hand Held Static 1 Digital Static Meter Model 80303
The Model 80303 is a small hand held field strength meter with digital display for measuring electrostatic charges in Volts and is used if more accurate readings are required than with the standard hand held meter. In order to obtain optimum results, the distance between test object and sensor head, depending on degree of charge and the condition of the objects' surface, can be incremental. The device is equipped with a Hold function to keep the measured value stored on the display. The integrated micro-computer automatically converts the measured field strength into the equivalent charge in Volts.