Ion Blaster Beam™


ion blaster beamThe Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It’s compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an "air amplifier" (Model AM40) maximizes ionized airflow with large volume entrained while m inimizing the use of compressed air.

In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit “plastic PET head” of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.

  • Effective Static Elimination
  • Can clean static free dust at a distance
  • Compact design to fit in small spaces
  • Stand is pre-drilled for easy mounting

Ion Blaster Beam Benefits:

  • Low compressed air use
  • Rapid static decay
  • Quiet Operation
  • Shockless and non-radioactive
  • Compact and rugged design
  • Intake may be ducted to bring in atmospheric air from another area
  • No moving parts and minimal maintenance
  • Variable flow and force

How They Work

Compressed air is supplied at (A) where it enters the air amplifier section of the Ion Blaster Beam and follows the Coanda profile inside the amplifier. Ambient air is entrained at (B) into the amplifier. The Ionizing Point (C) ionizes the amplified airflow exiting as a powerful high flow of static removing, ionized air ay (D). Unit is mounted on a stand (E) for convenient installation.

Specifications

Certification: North American Power Supplies certified to UL and CSA standards and Spot Ionizer used with the Ion Blaster beam is included with the certification. European Power Supplies CE approved and Spot Ionizer used with the Ion Blaster Beam is included with the certification. Stainless steel emitters on the ionizer.

Electrical: For use with 7 kV rms, 5 milliamperes (max) power supply which will last much longer than 5 kv power supplies.

Electrical Hazard: Shockless (less or eualt to 5mA)

Maximum Ambient Temperature: 122ºF or 50ºC.

Part # Description
17040 Ion Blaster Beam™ includes Air Amplifier, Spot Ionizers, Stand and 2 meters shielded cable
17140 Ion Blaster Beam™ and Power Supply
17340 Ion Blaster Beam™ Kit (c/w Ion Blaster Beam™, Power supply, Model 90001 water removal filter and Model 90008 regulator wi. gauge
80111 120 V Power Supply, 2 outlet
80121 230 V Power Supply, 2 outlet
80112 120 V Power Supply, 4 outlet
80122 230 V Power Supply, 4 outlet
90001 Water Removal Filter c/w auto Drain
90008 Regulator with gauge

 

Applications

  • Eliminate static charge and cleaning parts
  • neutralize shrink wrap
  • Form fill and seal applications for bag opening
  • Neutralizing and cleaning the inside of blow molded parts
  • Eliminate static and cleaning of plastic assemblies
  • Dust removal from parts prior to painting
  • Remove static charge in slitting applications
  • Cleaning of packaging
  • Neutralization of static charge inside containers.

Dimensions

 

Power Supply

Ion Blaster Beam™ power supplies are available in various models including a unit that will monitor the static bars for effectiveness.

Voltage Model # Description
110V ENC-110/2 Two outlet (Can connect two static bars)
220V ENC-220/2 Two outlet (Can connect two static bars)
110V ENC-110/4 Four outlet (Can connect four static bars)
220V ENC-220/4 Four outlet (Can connect four static bars)
110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
220V Multistat 220 Four outlet (Can connect four)

 

info request button


Compressed Air Solutions To Meet Your Application Needs

About Nex Flow™

Nex Flow™ Air Products Corp. is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce noise levels and compressed air use, and vortex tube technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.

Sitemap

Our Products

Nex Flow™ Air Products Corp. is a manufacturer of Air Amplifiers, Air Knives, Air Jets, Air Nozzles, Air Operated Conveyors, Cabinet Panel Coolers, Industrial Housekeeping Products, Static Control Products, Vortex Tubes and Tool Coolers. Our brand names are Frigid-X™, Silent X-Stream™, X-Stream™, Air-Edger™, Ring-Vac™ and Air-Blade™.

Sample Content

Nex Flow™ Air Products Corp. provides an indepth information on Air Amplifiers, showing our Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature our Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. Air Jets and Air Nozzles feature our Standard Air Jets and Nozzles, X-Stream™ Air Nozzles and our Air Edger™ Flat Jet Nozzle. Much more information on our product line is available on this web site.

Get in Touch

  • USA/Canada:
    (877) 797 2777
  • International:
    (416) 410 1806
  • Email:
    sales@nex-flow.com
  • USA Address:
    300 International Drive, Unit 100
    Williamsville, NY, 14221
  • Canada Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7