Peelable Spray Booth Coating, Floor Coverings For Spray Booths

Peelable Spray Booth Coating from Carbicote help prevent the accumulation of paint overspray inside a spray-booth which is UNSAFE and UNPRODUCTIVE.

UNSAFE – Paint overspray and residue may be toxic to workers and cause serious fire and explosion risks.

UNPRODUCTIVE – The build up of paint overspray lowers productivity by:

  • 1) reducing visbility

  • 2) creating uneven and sticky walking surfaces

  • 3) causing product defects from dirty surroundings

Strippable, Water Based, Coatings, Spray Booth, Walls, Floors, Carbicote

Carbicote Peelable Spray Booth Coating

942 Bright White High Solids Water Based Peelable Spray Booth Coating – WALLS w/b

Carbicote 942 Bright White High Solids Water Base Peelable Coating is the workhorse of the Carbicote line. It protects spray booth surfaces from the overspray of paints and coatings applied within the spray booth. 942 forms a continuous film membrane, similar to a plastic sheet, that acts as a barrier between the wet paint overspray and the clean metal spray booth surface. It is a temporary coating designed to be stripped during booth maintenance, then additional material reapplied. 942 is non-flammable and not-toxic. It can be stored in the spray booth area, since it presents no fire hazard in storage. 942 applies easily by spray, and has no odor. 942’s 54% weight solids are higher than other brands and offers maximum coverage per square foot.

942 Bright White High Solids Water Base Peelable Coating
942 MSDS

948 Super Peel Bright White Water Based Peelable Coating – WALLS w/b

Carbicote 948 Super Peel Bright White Water Peelable Coating has the toughest release the in the Carbicote line. Like the other products, it is fast drying, non-toxic, non-flammable, and low in VOC. 948’s dried coating film is very strong and it will release from some substrates that prove difficult for conventional booth coatings. 948 forms a continuous film membrane, similar to a plastic sheet, that acts as a barrier between the wet paint overspray and the clean metal spray booth surface. It is a temporary coating designed to be stripped during booth maintenance, then additional material reapplied.

948 Super Peel Bright White Water Base Peelable Coating
948 MSDS

949 Bright White High Solids Water Based Peelable Coating – WALLS w/b

Carbicote 949 Bright White High Solids Water Base Peelable Coating protects spray booth surfaces from the overspray of paints and coatings applied within the spray booth. 949 forms a continuous film membrane, similar to a plastic sheet, which acts as a barrier between the wet paint overspray and the clean metal spray booth surface. It is a temporary coating designed to be stripped during booth maintenance, then additional material reapplied. 949 is non-flammable and non-toxic. This product can be stored in the spray booth area, since it presents no fire hazard in storage. 949 applies easily by spray and has no odor. 949 offers outstanding coverage on a square foot basis. 949 is bright white for maximum light reflectivity. 949 dries quickly, and forms a strippable film in one coat. 949 releases well from galvanized steel, stainless steel, and bare aluminum. For powder coated or painted booths, we recommend 945 Crystal Clear.

949 Bright White High Solids Water Based Peelable Coating
949 MSDS

946 White Solvent Based Peelable Spray Booth Coating – WALLS s/b

Carbicote 946 White Solvent Based Peelable Spray Booth Coating is a solvent-based booth coating which protects spray booth surfaces from the overspray of paints and coatings applied within the spray booth. 946 forms a continuous film membrane, similar to a plastic sheet, which acts as a barrier between the wet paint overspray and the clean metal spray booth surface. It is a temporary coating designed to be peeled during booth maintenance, then additional material reapplied. 946 dries quickly, and its film thickness can be built quite rapidly with minimum sagging and running.

946 White Solvent Based Peelable Spray Booth Coating
946 MSDS

947 White Heavy Duty Floor Peelable Coating – FLOORS s/b

Carbicote 947 White Heavy Duty Floor Strippable Coating (HAPs Free) is a solvent based, seamless, temporary coating for spray booth floors. It surpasses booth paper in durability and eliminates the labor required to prep floors, lay paper, and tape seams. 947 sprays easily and strips readily. 947’s white color reflects light and improves overall brightness in the spray booth. 947 dries to touch in fifteen minutes and withstands normal booth traffic in one hour.

947 White Heavy Duty Floor Strippable Coating
947 MSDS

951 Prep Coat Clear Waterborne Coating – FLOORS w/b

Paint Spray Booth Coatings, Carbicote951 Prep Coat Clear Waterborne Coating is a clear waterborne coating that is applied to spray booth floors to aid the release of 947 White HD Floor Strippable Coating when peeled during booth maintenance. New cement, unsealed, or porous floors should be coated with 951 Prep Coat Clear WB Coating before topcoating with 947 Floor Strippable. Prep Coat will remain on the floor after stripping and does not have to be reapplied with every cycle. 951 is silicone free.

951 Prep Coat will coat over some surface contaminants that have not been removed and will help the release of 947 Floor Strippable from floors that do not have a smooth profile. Prep Coat dries quickly, and can be recoated with 947 White HD Floor Strippable Coating as soon as it is tack free, approximately one hour under normal conditions.

951’s coverage is related to the porosity of the concrete. To keep the recoating interval of the 947 Floor Strippable to a minimum, only apply enough prep coat to leave a low sheen appearance on the surface-generally no more than 0.5 mils on sealed surfaces.

951 Prep Coat Clear Waterborne Coating
951 MSDS


Carbicote Coatings | Removable Protective Coatings | Peelable Spray Booth Coating

About Tech Sales Co.

Tech Sales Co., was established in 1983 with headquarters near Toronto, Canada, Tech Sales Co., maintains a network of branch offices and associated representatives and distributors across Canada. Our technical support in-house is strong with backup from principles around the world. Expertise is available in the following specific areas: compressed air blow off, static control, surface treatment of plastics, plastic flaw repair, non-hazardous chemicals, ultrasonic cleanings systems and other special technologies

Sitemap

Our Products

Tech Sales Co., is a manufacturers representative company devoted to unique technologies for industry. We represent Nex Flow™ Air Products Corp., HAUG North America, Dynamic Descaler and have other products for static control and elimination, corona treatment, plastic repair and environmentally friendly chemicals.

Sample Content

Tech Sales Co., provides an indepth information on Air Amplifiers, showing Nex-Flow™ Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. HAUG North America products feature Staic Elimination Products. Dynamic Descaler a revolutionary biodegradable descaler and much more information on is available on this web site.

Get in Touch

  • Telephone:
    (416) 410-1313
  • Email:
    lesr@tech-sales.com
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7