Biodegradable Water Based Degreaser
- BLUE POWER Water Based Cleaner

BLUE POWER biodegradable water-based degreaser, colour concentrate cleanup, nontoxic, non corrosive, nonflammable and biodegradable inker head and blanket cleaning for can manufacturing and printing plants.

Cleaning Solution
(1 part BLUE POWER concentrate to 7 parts water) 1 gallon of BLUE POWER to 7 gallons of water.

WILL CLEAN can printing inker heads permanently mounted or removable.

WILL REMOVE water-soluble inks (such as polyesters), grease, oil and other surface contaminants.

Applications:

Removable Heads: Suspend inker head in 300 to 400 gallon soak tank of premixed

Blue Power Biodegradable Water Based Degreaser solution. Air agitation, circulation pressure pump or hydraulically operated agitation systems are very successful for automatic cleaning. Depending upon density of ink coating, 20 to 30 hours of continuous cleaning will give excellent results.

Non-Removable Heads: Sprayers, brushes, and rags will obtain good results by manual application.

Approximately six to seven inker heads have been cleaned in a 400-gallon air-agitated batch of solution before disposing of used solution by local sewer.

Biodegradable Water Based Degreaser Solution classified as non-hazardous waste material.

Note:

BLANKET AND ROLLER CLEANING during production time should be conducted as follows:

Blue Power Biodegradable Water Based Degreaser concentrate should be diluted to at least 1 part concentrate to 25 parts water or higher. This will reduce prolonged scuff and abrasion on the finished cans, and will eliminate product residue built up on blankets that could interfere with compatibility of the ink and spray cost of lacquer. If concentrates higher than 1 to 25 are used for cleaning blankets, then a dampened cloth with plain water should be used to wipe the blanket free of cleaner residue.

This process can eliminate the use of the dangerous isopropyl alcohol and tri-chiors.

REMOVE ANY TYPE OF SOIL, EXCEPT PERMANENT DYE, ACID STAIN, OR SCALE.

  • USE FOR INKS, GREASES, OILS, CARBON, WAX, MILDEW, PIGMENTS, CHLORINATED LUBES, FOOD STAINS, & MORE.

  • BUFFERED ALKALINITY FOR USE ON ALUMINUM & OTHER SOFT METALS.

  • FREE-RINSING...LEAVES NO FILM OR RESIDUE.

  • LEAVES SURFACE READY FOR PLATING, PAINTING, COATING, OR BRAZING, WITH NO ADDITIONAL PREPARATION NECESSARY.

  • CONTAINS A BUILT-IN PASSIVE INHIBITOR FOR SHORT-TERM ELIMINATION OF OXIDATION.

  • LOWER USE-COST& DISPOSAL-COSTS THAN SOLVENTS.

Meets or exceeds OSHA, EPA, USDA, & DNR
requirements for health & safety reasons.

Use by spray bottles, pressure washers, steam cleaners, & soak tanks.

USDA Approved A-1.

Nontoxic, Nonflammable, Biodegradable

 

About Tech Sales Co.

Tech Sales Co., was established in 1983 with headquarters near Toronto, Canada, Tech Sales Co., maintains a network of branch offices and associated representatives and distributors across Canada. Our technical support in-house is strong with backup from principles around the world. Expertise is available in the following specific areas: compressed air blow off, static control, surface treatment of plastics, plastic flaw repair, non-hazardous chemicals, ultrasonic cleanings systems and other special technologies

Sitemap

Our Products

Tech Sales Co., is a manufacturers representative company devoted to unique technologies for industry. We represent Nex Flow™ Air Products Corp., HAUG North America, Dynamic Descaler and have other products for static control and elimination, corona treatment, plastic repair and environmentally friendly chemicals.

Sample Content

Tech Sales Co., provides an indepth information on Air Amplifiers, showing Nex-Flow™ Standard Air Amplifiers, Adjustable Air Amplifiers and Adjustable Gauged Air Amplifiers. Air Knives feature Standard Air-Blade™ Air Knives, Stainless Steel Air-Blade™ Air Knife, X-Stream™ Air-Blade™ Air Knife and our X-Stream™ Hard Anodized Air-Blade™ Air Knife. HAUG North America products feature Staic Elimination Products. Dynamic Descaler a revolutionary biodegradable descaler and much more information on is available on this web site.

Get in Touch

  • Telephone:
    (416) 410-1313
  • Email:
    lesr@tech-sales.com
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7