Stainless Steel Cabinet Coolers From ARTX

5 Thermostatic Stainless Steel Cabinet Coolers Kit Components

Why Stainless Steel Cabinet Coolers for Electronic
Enclosure Versus Freon Air Conditioners?

  • Less expensive to operate
  • No Freon Leaks
  • No costly repair calls
  • Minimal, if any, maintenance
  • Provide longer life to expensive controls
  • No production down time waiting for repairs
  • Maintain NEMA 4, NEMA 4x, and NEMA 12 integrity
  • All models constructed of Stainless Steel
  • All models UL listed
Stainless Steel Cabinet Coolers Operating Cost
  ARTX Stainless Steel Cabinet Coolers BTU Model 70325 /td> Freon Air Conditioner 1500 BTU
Initial Unit Cost $465.00 (20 year life)
$23.25/year		 $1800.00 (5 year life)
$360.00/year
Installation $50.00/hour
$2.50/year		 $50.00/hour
$10.00/year
Maintenance No Maintenance Maintenance
4 hours/year for charging freon,
cleaning and replacing filters,
leak checks
$200 per year
Operation 5 hours/day, 9 months/year
Based on $0.25/1000 cu.ft.of air
$288.00/year 		7 hours/day, 9 months/year
$72.00/year
Total Operation Cost $313.75/year $642.00/year
(Not including downtime for repairs)

Freon air conditioners must be deregulated by 65% at 90°F and 95% 115°F. Therefore, the operate longer than Control Cooler or oversized to provide same amount of cooling during warmer weather when ambient temperature is higher.

The recommended thermostat setting is 90°F (32°C). This setting is within the safe operating limits of most components and reduces condensation on the outside of the cabinet during hot humid weather.

Temperature swings create connector stress, while excess heat dries circuit boards and results in the life spans of the control being cut in half for every 20°F (10°C) over normal operating tempertures of 100°F (38°C).

The Stainless Steel Cabinet Coolers are very inexpensive insurance against premature replacement of a $2000 to $3000 electronic circuit board.


ARTX, Compressed, Air, Products

 


Site Designed by Panther Marketing & Design