New Products From Tech Sales

Air Wipe, Blow-Off System, Ring-Blade, Nex FlowAir Wipe Blow-Off System - Ring-Blade™

Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.

It produces a “laminar” flow of air along its 360º angle using the “Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.

Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle “rings” or simple annular slots used by other air wiping systems.

Ion Air Blower

HAUG's Ion Air Blower is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. the air flow hence becomes conductive and is able to eliminate electrostatic surface charges on non-conductive material.

The Ion Air Blower operates on a low pressure priciple and does not require costly compressed air. the power supply, which is required to feed the Ionizing Bar with high voltage, also operates on a low energy consumption level. this makes the Ion Air Blower a very efficent Ionizing system, especially for applications where constant Ionization is required.

Biodegradable Chemical Descaler

It is a safe non-toxic, biodegradable chemical to be used on the waterside of heat transfer equipment. You do not have to heat it.

Dynamic Descaler™ is safer for the employees to use than other acid products. Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run). Cleans down to the original surface without pitting. Dynamic Descaler™ is safe on copper, copper-nickel, bronze, brass, iron and rubber.

Carbicote,Strippable,Coatings Carbicote® Strippable Coatings

Carbicote® water-based strippable coatings can be easily removed from many surfaces. Carbicote® strippable coatings is commonly used as safe peel-off protection for spray booth walls, lights, and windows.

Carbicote® Bright White Water Base protects spray booth walls with a reflective strippable coating. (See upper hand)

Carbicote® Crystal Clear Water Base protects spray booth lights and windows with a transparent strippable coating. (See lower hand)

Bottledyne, Corona, Treating, SystemBottleDyne™ Corona Treating System

Taking unique advantage of open air Corona discharge, directed to the surface requiring treatment, 3DT's self contained BottleDyne™ pre-treating systems set new standards for Corona technology. It's now possible to inline Corona treat virtually any extrusion or injection blow molded container at line speeds of up to 7,000 parts per hour. Treatment is done delicately, quickly and efficiently, without any damage to the surface being treated and without any adverse effect on the molding, printing or labeling process.

Many engineering plastic materials have insufficient surface tensions for printing or bonding. Polypropylene and polyethylene are prime examples. These materials have many useful properties, which make them materials of choice in the container industries. However, their poor wetability offers severe limitations when it comes to design choices.

Site Design: Process Controls And Instrumentation