Tilt Lock Center Lifts provide a simple, safe and effective method of handling rolls with cores that are in the vertical position. Center Lifts utilize gravity activated teeth that grip the core to lift the roll. Center Lifts may not be disengaged until the roll is placed
on a stationary surface. Once the weight of the roll has been removed from the Center Lift, the teeth are locked in the retracted position with a twist of the knob. The center lift may now be removed from the core. Center Lifts are available for cores from 3 inches to 14 inches in diameter. An electric solenoid release device is also available. Available options include the following:
- Remote solenoid tooth release mechanism
- Dual diameter centerlift for 3" and 6" cores, two centerlifts in one unit
- Anti-telescoping device to prevent telescoping of material when lifted by core
Dimensional information for 3" Centerlift A3M-1T (1-ton capacity)
Dimensional information for 6" Centerlift A6M-1T (1-ton capacity)
Dimensional information for 3" Centerlift A3M-2T (2-ton capacity)
Dimensional information for 6" Centerlift A6M-2T (2-ton capacity)
 A36M-1T Step Centerlift designed to accommodate 3" and 6" cores combining two diameters in one unit. |
 A3SP-1T Spring Engaged Centerlift designed to accommodate 3" cores. |
 A3R-3T Remote Centerlift designed to accommodate 3" cores. |