|
The
Eagle®
Tac-Monitor is a proportional speed
monitor that converts rotating shaft speed
to an analog 4-20mA output signal. Interfaced
with the customer's PLC, the Tac-monitor is
a proven, cost-effective device for virtually
any speed monitoring requirement.
Encased
in durable ABS plastic, the small, but rugged
control module mounts conveniently inside
electrical panels and OEM control compartments.
The non-contacting proximity sensor, available
in three mounting styles, is unaffected by
material build-up and hostile environments.
Immune to electrical and RF interference,
the sensor may be remotely located up to 10,000
feet from the control unit, using standard
2-wire unshielded cable.
Installation
is quick, easy and precise. Light emitting
diodes (LEDs) on the control module and sensor
head aid installation and troubleshooting.
No field calibration is necessary - the control
module is factory calibrated.
The
Tac-Monitor
fulfills a wide variety of industrial applications.
One such application: conveyors with variable
speed drives are commonly governed by ramp-up
timers. Should slippage occur during the critical
ramp-up period, the conveyor is unprotected
and subject to serious damage. The result
is very often costly, hard-to-recover downtime.
The Tac-Monitor,
by contrast, continuously monitors the conveyor
from beginning ramp-up through normal operating
speed, providing total protection and control.
|
|
|
Enclosure..................................ABS
Plastic
Power
Input..........................120 VAC, 10W*
Power Output...........Proportional
4-20mA DC
Linearity................................Better
than 1%
Accuracy..............................Better
than 1%
Repeatability.......................Better
than 0.5%
*
DC Input Models Available
|
