260 Voltage Sensor from Time Mark

260, Voltage Sensor, Time MarkThe Model 260 Voltage Sensor is a single set-point voltage sensor. Input voltages above the set-point cause the output contacts to energize (contacts 1 & 8 closed). Input voltages below the set-point cause the output contacts to de-energize (contacts 1 & 2 closed). The dead band between pull-in and drop-out is less than 2%.

The standard unit has a screwdriver, or fingertip adjustable set-point range of approximately 35%. of the maximum voltage. This device can also be provided with a factory calibrated trip point.

AC versions of the Model 260 Voltage Sensor are not frequency sensitive, and may be used in systems from 50 Hz to 400 Hz. DC models are not polarity sensitive. This device requires a standard 8-pin socket, such as Time Mark's Model 51x120.

  • Monitors for over or under voltage

  • Five year unconditional warranty

  • LED status indicator

  • Plug-in mounting

  • Automatic reset

pdficonsmall.gif (153 bytes) pdf download


260, Voltage Sensor, Time Mark


Time Mark Corporation