Description
The Model 2732 Single Phase
Current Monitor is designed to continuously monitor single-phase
AC current. It consists of a solid-state sensing circuit driving
an internal electromechanical relay. The Model 2732 has two
operating modes: over-current sensing or under-current sensing.
The operating mode is selected by means of a
slide switch on the monitor.
When operating voltage is
applied, and the current level is correct according to the
operating mode, the relay will energize. A fault condition
will cause the OVER/UNDER LED on the monitor to illuminate,
and the trip delay will begin. If correct current is restored,
the relay remains energized. If current is not restored
during the delay period, the relay will de-energize and
the red TRIP indicator will illuminate.
The Model 2732 has three
reset configurations: automatic, manual (add jumper), or
manual remote (add switch). The standard model, as provided,
will reset automatically.
|
|
Hot Features:
- Detects over or
under current
- Adjustable trip
delay
- Automatic or manual
reset
|
