Description
The Model 4062 Pump-Up Controller
provides total control for duplex pumping systems. The Model
4062 Pump-Up Controller monitors, controls and displays the
liquid level in a tank or reservoir, up to a depth of 34.6
feet. The input to the Model 4062 can be from any 2 or 3-wire
transducer with a 4-20mA output that represents 0 to 34.6
feet. A 24VDC regulated probe supply is included. A Level
Simulator is provided to aid in programming these five set
points; Low Alarm, Level 2, Level 1, Pumps Off and High Alarm.
A universal zero to 30 second
On Delay can be programmed to prevent outputs from closing
due to input fluctuations caused by turbulent conditions.
An additional 4-20mA output with zero and span controls
is provided for a chart recorder or other external device.
Four heavy-duty 10 amp,
120V contacts are provided for pump control and alarm activation.
An auto-dialer or other emergency device can be activated
with the SPDT power loss relay. This relay is held open
when power is applied.
Pump outputs include duplex
alternation as well as hand-off-auto switches. Pump run-time
can be displayed for each pump with tenth of an hour resolution,
up to 99,999.9 hours. The Model 4062 Pump-Up Controller
can be panel-mounted (11 1/8” x 4 5/8”), same
as Time Mark Models 403, 404, 4042 and 4052, or surface-mounted
using the optional surface-mounting kit, Model 4000.
|
|
Hot Features:
- Duplex Pump Alternation
- 4-20 mA Input
- Scaleable 4-20mA
Output
- Hand-Off-Auto Controls
- Dual Run-time Meters
|
Applications
for Model 4062 Pump Up Controller
