|
Eight
Channel Process Signal Data Logger
|
|
SmartReader
Plus 7
|
| Optional
Input Ranges: |
All external channels 0 to 2.5 volts, 0 to 5 volts, 0 to
10 volts, or 0 to 25mA. |
| Accuracy:
|
+/ . 0.5% of full scale. |
| Memory Size:
|
32 KB, 128 KB and 1.5 MB. |
| No. of Channels:
|
Eight. (One internal thermistor and 7 analog inputs)
|
| Transducer
Restrictions: |
The use of a single power supply is recommended to avoid
ground loops or use loop isolators. |
| Overload
Protection: |
Voltage channels: +/-40 volts and Current channels: +/-70mA
(reverse polarity protected). |
| Standard Inputs
|
Input type
|
Input Impedance
|
| |
0 to 2.5
volts DC channel 0 to 5.0 volts DC (2 channels) 0 to 10.0
volts DC channel 0 to 200 millivolts DC channel 0 to 25
milliamps DC (2 channels) |
Greater than
1M ohm Greater than 1M ohm Greater than 1M ohm Greater than
1M ohm 20 ohms |
| Remote Network
Communications: |
See
Network & Communications |
|
 |
|
|
.
|
|
Multi-channel,
configurable, 12 bit data loggers
|
|
Size: |
107 x 74 x 22 mm (4.2" x 2.9" x 0.9").
|
|
Weight: |
110 grams (3.75 ounces). |
|
Case Material: |
Noryl® Plastic. |
|
Operating Limits: |
-40°C to 70°C (-40°F to 158°F) and 0
to 95% Relative Humidity (non-condensing). |
|
Clock Accuracy: |
+/-2 seconds per day. |
|
Battery: |
3.6 volt Lithium, 1 Amp-Hour. |
|
Power Consumption: |
5 to 10 microamps (continuous). |
|
Battery Life: |
10-years warrantied (under normal use). Factory replaceable.
|
|
Memory Size: |
32 K (21,500 readings). 128 K (87,000 readings). 1.5 MB
(1,000,000 readings). See specific models for availability.
|
|
Sampling Method: |
1. Continuous (First-in, First-out); not available with
sample rates faster than 8 seconds.) 2. Stop when full (Fill-then-stop).
|
|
Sampling Rate: |
User selectable rates from 25 per second to one reading
every 8 hours. (BP-101 battery pack or PS-201 Power Supply
required for sample rates faster than 8 seconds. See Accessories
section for details). |
|
Resolution: |
12 bit (1 part in 4096). |
|
PC Requirements: |
IBM PC or 100% compatible running MS® Windows 3.1,95,98,
or NT, with a least 2 MB RAM, 2 MB of hard drive disk space
and one free serial port. |
| PDF
|
Click
Here |
|
Product Approvals: |
Meets Part 15 for Digital Devices of the Code of Federal Regulations
of the Federal Communications Commission (FCC). Meets Class
A radiated and conducted emission requirements of Section
2 of the Radio Interference Regulations of Communications
Canada. IEC801-2, 3, 4 and EN55011 covering ESD, RFI Immunity,
EFT/ Burst and Radiated Emissions respectively for the Commission
of the European Communities (CE). |
Resistance to X-Rays: |
Tested for protection against a 160kV dose @ 5mA for 30 seconds
(150mA-sec) @ 38 inches F.F.D. (about 100 times that of an
airport X-Ray machine). Tested for protection against Gamma
Ray (equivalent to 0.137-1.38 mega volts) IR 192 - 28 curies
@ 30 second exposure source to object distance 5".
|
Internal Temperature
Sensor
|
Type: |
Negative Temperature Coefficient Thermistor. 10,000 ohms @
25 C (77 F). |
Tolerance (sensor only): |
+/-0.2 C, over the range of 0 to 70 C (+/-0.3 F, over the
range of 32 to 158 F). |
Range: |
-40°C to 70°C (-40°F to 158°F).
|
Resolution: |
0.03°C (0.05°F) at 25°C (77°F). Better
than 0.07°C (0.12°F) between -25°C (-13°F)
and 70°C (158°F). Better than 0.13°C (0.23°F)
between -40°C (-40°F) and -25°C (-13°F).
|
|
PC to SmartReader
Communications
To
setup, download or view realtime information from an ACR SmartReader
Data Logger, all that is required is an ACR IC-101 Interface Cable.
Connection is simple. Plug the IC-101 connector into your PC's
serial port and the stereo cable into the ACR Data Logger. The
IC-101 cable is included with the ACR TrendReader Interface Package.
No tools, interface cards or docking stations required. You can
setup, download or view realtime information from up to 8 loggers
at once, locally or over a modem.
|
 |
TrendReader®
Software
TrendReader®
for Windows® is a powerful, versatile, and easy to use software
package designed exclusively for ACR's SmartReader, SmartReader
Plus and OWL Data Loggers. Powerful features and easy setup enables
logged data to be collected and thoroughly analyzed in seconds. |
|
Fast
and Easy Logger Setup
Since
TrendReader® comes complete with built-in menus for Sample
Rate, Start Delay, Equations and more, setup is fast and easy.
In addition, equations are already included for all ACR accessories
so users need only select the appropriate equation from the menu.
Realtime readings are displayed in the Setup window, allowing
you to ensure that your logger's setup is correct before placing
it in the field. |
 |
One-Touch
Table View
With
ACR's TrendReader® Software, logged data can be viewed in
Table format to permit detailed analysis of logged data. Multiple
channels of data can be displayed at once with each reading displaying
the time and date. You can even select portions of, or all the
table information and paste it into your favorite Windows®
presentation or word processing program.
|
 |
Presentation
Quality Graphs
TrendReader®
allows you to present logged data the way you want. Multiple logged
data sets can be displayed and compounded to create new graphs.
For added presentation power, TrendReader® lets you add comments,
change graph colors, zoom in on specific portions of data, display
your data using custom engineering units and print to any Windows®
compatible printer with ease. TrendReader® even lets you
copy/paste your graphs directly into your case reports. If you
prefer to use Excel,® Lotus® or other popular spreadsheet
programs, data can be exported into ASCII and CSV formats.
|
|
|
