| TEX-900
- p/n ASSY-1189-02 |
REX-900
- p/n ASSY-1190-02 |
|
| Power |
Varies
with I/O Module Used |
Varies
with I/O Module Used - refer to I/O Module specifications |
| Power
Consumption |
2.64
Watts @ 250 milliWatts transmit power
(+ I/O Module)
1.8 Watts @ 70 milliWatts transmit power;
0.42 Watts in standby |
0.66
Watts (+I/O Module) |
| Temperature
Range |
-30C
to 60C (-22F to 140F) |
-30C
to 60C (-22F to 140F) |
| Mounting |
Back
plate mounting - six (6) screw holes (including I/O module) |
Back
plate mounting - six (6) screw holes (including I/O module) |
| Dimensions |
6.6"
x 3.4" x 0.6" including Input Module
(168mm x 86mm x 15mm) |
7.6"
x 3.4" x 0.8" including I/O module
(192mm x 86mm x 20mm) |
| LED
Indicators |
One
(1) Red for correct powr and one (1) Green which is on when transmitting |
One
(1) Red for correct power and one (1) Green which is on when receiving
correct data |
| Frequency |
902
to 928MHz - ISM Band |
902
to 928MHz - ISM Band |
| Channel
Hopping |
FHSS
- 252 channels |
FHSS
- 252 channels |
| RF
Bandwidth |
10
kHz |
10
kHz |
| Rx
Sensitivity |
N/A |
-108dbm |
| Unit
ID |
16-bit
coding selectable by DIP switches |
16-bit
coding selectable by DIP switches - multiple receivers can be
set to replicate signals from a single transmitter |
| Transmit
Power |
250
milliWatts (or 70milliWatts for short range - selectable by DIP
switch) |
N/A |
| Antenna
Connector |
MCX
(female) |
 SMB
(female) |
| Antenna
Impedance |
50
ohms |
50
ohms |
Approved
Antenna
Gain |
12dB
maximum |
There
is no limit on antenna gain for receivers |
| Range |
3
to 4 miles (5 to 6km) line-of-sight with Yagi antennas, 1 to 2
miles (2 to 3km) with Omni antennas |
3
to 4 miles (5 to 6km) line-of-sight with Yagi antennas, 1 to 2
miles (2 to 3km) with Omni antennas |
| Environmental
Rating |
NEMA
1 (equivalent to IP30) |
NEMA
1 (equivalent to IP30) |
| Approvals |
USA
- FCC Part 15.247
Canada - ISC RSS 210 |
USA
- FCC Part 15.247
Canada - ISC RSS 210 |
Current
Input Module
(p/n ASSY-1426-01) |
Current
Output Module
(p/n ASSY-1427-01) |
|
| Input/Outputs |
Four
(4) current inputs (non-isolated)
Seven (7) discrete outputs (non-isolated) |
Four
(4) 4-20mA
(non-isolated)
Seven (7) discrete
(non-isolated; open collector) |
| Maximum
I/O |
Current:
30mA (or 7.5VDC)
Discrete: 30VDC/3mA |
Current:
20mA
Discrete: 26VDC/500mA
(1A max for all channels total)
|
| I/O
Range |
Current:
4-20mA or 0-20mA (selectable with jumper)
Discrete: >2V = OFF (pulled to 5V internally);
<0.8V = ON |
Current:
4-20mA or 0-20mA (selectable with jumper)
Discrete: Switches between 0V and power supply voltage (open collector
output) |
| Wiring
Connections |
18-24
AWG screw type terminals |
18-24
AWG screw type terminals |
| Power |
10
to 26VDC regulated |
10
to 26VDC regulated |
| Power
Consumption |
97milliWatts
(+ transmitter power) |
175milliWatts
(+power required to drive current outputs +receiver power) |
| Impedance |
Current:
250ohms
Discrete: 10 kilo-ohms |
Current:
350 ohms to 1150 ohms
Discrete: N/A |
| Accuracy |
N/A |
Current
loop: 0.2% of full scale |
| Repeatability |
N/A |
Current
loop: 0.02% |
| Analog
Resolution |
12-bit |
12-bit |
