| Datum 2000™ Specifications |
| Display |
- Type:
- Light emitting diode
- Color:
- Red
- Height of Digits:
- 0.56 inch
- Maximum Readout:
- +9999 to +31999
- Reading Rate:
- 2 to 3 times per second depending on input voltage
- Overload Signal (over range reading):
- OVEr
- Underload Signal (under range reading):
- UndEr
- Polarity Signal:
- Negative only
- Brightness:
- Constant
|
| Accuracy (Readout Only) |
- At 73°F (23°C):
- ±0.01%R ±1 digit
- At 60°F to 95°F (16°C to 35°C):
- ±0.04%R ±1 digit
|
| Environmental |
- Operating Temperature:
- 32°F to 130°F (0°C to 55°C)
- Storage Temperature:
- -40°F to 185°F (-40°C to 85°C)
|
| Electrical Data |
- Power:
- Domestic:
- 24 VDC (115 VAC 60 Hz, 12 watt adapter provided w/ -1 models)
- European:
- 24 VDC (220 VAC 50 Hz, 14 watt adapter provided w/-2 models)
- Power Cord Length:
- 6 feet (approx.)
|
| Physical |
- Width:
- 3.85 inches (98mm)
- Height:
- Meter: 1.74 inches (44mm)
- Manometer: 3.50 inches (89mm)
- Depth (including connector):
- 7 inches: (178mm)
|
| Cutout Dimensions |
- Cutout Dimensions:
- Meter: 1/8 DIN: 1.77 in. x 3.62 in. (45mm x 92 mm)
- Manometer: 1/4 DIN: 3.54 in. x 362 in. (90mm x 92 mm)
- Font Panel:
- Meter: 3.85 in x 1.99 in. (98mm x 50mm)
- Manometer: 3.85 in x 3.74 in. (98mm x 95mm)
|
| Analog Output |
- Transducer:
- Same as transducer output voltage
- Transmitters:
- No analog output. The DATUM 2000™ terminates the current loop.
|
| Adjustment Capabilities (accessible through the user set-up menus) |
- Voltage Inputs:
- +11 to -11 volts
- Current Inputs:
- 0 to 20 mA
- Maximum Reading:
- +31999
- Minimum Reading:
- -9999
|
| Input Specifications |
- Transmitter Inputs Signal:
- 4-20 mA
- Transmitter Inputs Impedance:
- 150 ohm
- Transmitter Inputs Voltage Drop:
- 3 VDC (max.)
- Transducer Inputs Signal:
- +11 VDC to -11 VDC
- Transducer Inputs Impedance:
- 45k ohm
|
Dual Channel Meter or Manometer - The Datum 2000™ Dual Channel Meter can be configured externally with one or two pressure transducers or transmitters. The Datum 2000™ Manometer is a fully self-contained unit with factory installed pressure transducer or transmitter.