|
 |
|
In Line Display Setra Model 880
|
 |
 SETRA-IN-LINE-DISPLAY (SID) This small, low-powered digital display can be installed in-line between a Setra pressure transducer (or transmitter), the user's application and power supply.
Features
- Convenient local display
- Small Size
- Low power consumption
- 3 1/2 digit LCD display
- Designed to be wired in-line
- Pressure displayed in engineering units
- Use with voltage or current input devices
- Optional Bayonet Connectors
| Model 880 Specifications |
| Display |
- Display:
- 3 1/2 (1999)
- Elevated Zero:
- 35% of Full Scale Range (max.)
- Type:
- 7 Segment LCD
- Polarity:
- Automatic (-) displayed
- Decimal Point:
- 3 position, jumper selected
- Overload:
- Three lower digits blank for readings
- Accuracy:
- 0.25% of reading ±1 count
|
| Environmental |
- Operating Temperature:
- 32°F to 140°F (0°C to 60°C)
- Storage Temperature:
- -40°F to 158°F (-20°C to 70°C)
- Temperature Coefficient:
- 215ppm/°F (120ppm/°C)
|
| Electrical Data |
- Common Mode Voltages:
- 0 to 5 VDC
- Input Impedance:
- 100k ohms
- Voltage Excitation:
- At 7 VDC = 1.5 mA
- At 32 VDC = 15 mA
- Over Voltage Protection:
- 40 VDC or peak AC continuous (Prevents damage to S.I.D. if miswired)
|
| When Used with Transducer Voltages (3 or 4 wire) |
- Voltage Inputs:
- 0 - 5 VDC
- 1 - 6 VDC
- 0.1 - 5.1 VDC
- 0.2 - 5.2 VDC
|
| When Used with Transmitters (4-20 mA) |
- Current Inputs:
- 4 - 20 mA (two wire self-powered)
- Loop Voltage Drop:
- 5.9 VDC max.
- Overload:
- 70 mA forward, 80 mA reverse
|
* Specifications subject to change without notice.
If you don't see what you need here, please contact us.
|
Powerful Solutions for Instrumentation & Control Problems!
In Line Display Setra Model 880
|
