 The
DensityPRO+ offers users a wide range of features similar to the
DensityPRO integrated density gauge product with the addition
of a separate transmitter. The DensityPRO+ incorporates a detection
and measurement design allowing for use of extremely small sources
in the most challenging process conditions.
Following the unparalleled popularity of the TN SGD Density Gauge,
Thermo Electron is proud to introduce the next generation nucleardensity
gauge, the TN DensityPRO+. The TN DensityPRO+ offers users a wide
range of features similar to our TN DensityPRO integrated density
gauge product with the addition of a separate transmitter. The
DensityPRO+ incorporates a detection and measurement design allowing
for use of extremely small sources in the most challenging process
conditions where pipe sizes may range from 1" (25.4 mm) to
40" (1020 mm).
Features and Benefits:
- Non-contacting design makes the
TN DensityPRO+ ideal for abrasive, corrosive, high pressure and
high temperature applications.
- Easy-to-use English Language user
interface makes for simple set-up and calibration.
- The DensityPRO+ can accept an
external 4 to 20mA flowmeter input, calculate mass-flow, and output
this data over one of three available isolated 4 to 20mA outputs.
Isolated loop-powered and isolated self powered current output
available.
- To satisfy a wide range of application
needs, the DensityPRO+ is available with a scintillator or ion-chamber
detector.
- The PVT (Polyvinyl Toluene) scintillation
detector used in the DensityPRO+ is designed to be resistant to
moisture and shock damage unlike competitive devices using Nal
detectors.
- Available communications options
include HART protocol, Model 9734 hand-held communicator and TN
Comm PC user interface. The Model 9734 eases installation time
by allowing uploads/downloads of gauge configuration to/from PC.
- Self-diagnostic and alarm history
software reduce troubleshooting time.
- FMRC and CSA approved.
|
