|
ANDERSON
CONTROLS
Your Single
Source For Process Instrumentation & Service |
7-130 INDUSTRY
ST
TORONTO ON M6M 5G3
Tel: 416 766-4195 Fax: 416-766-3948
Toll Free: 1 877
333-8882
|
Process Controllers
By Partlow
 Process
Controllers
The Most Comprehensive Range Of Industrial Quality Microprocessor
Based Process Controllers Available.
Partlow
process instrumentation offers a comprehensive line of 1/16, 1/8,
1/4 DIN size Indicating Controllers, for Industrial, OEM, Food &
Beverage, Dairy and Pharmaceutical industries. Applications include
temperature, pressure, level, flow, relative humidity, pH and others.
Partlow West, located in upper New York State, have been manufacturing
quality products for the process industries for over 75 years.
|
 Our
1/16 DIN Instruments
Series 1160
LOW in cost and are available as controllers covering the full
range from ON/OFF, Time Proportioning and full PID outputs.
Models also include single loop profile control with up to eight
set-point profiles; each of which can have up to six ramp and
six soak segments.
These models can function as stand-alone controllers and manual/auto
mode function is standard. Inputs include T/C's, RTD's, and
ALL commonly accepted analog inputs such as 4-20mA and DC volts
which, are scaleable.
|
|
 Our
1/8 DIN Vertical Instruments
Series 1800
LOW in cost and are available as controllers covering the full
range from ON/OFF, Time Proportioning and full PID outputs.
Inputs include T/C's, RTD's, and ALL commonly accepted analog
inputs such as 4-20mA and DC volts which, are scaleable.
|
|
 Our
1/32 & 1/8 DIN Horizontal Instruments
Series 3200
Offers ALL of the functionality of the above instruments and
are also available as process indicators in our AWESOME
Series 1880 which offer unprecedented indicator features
including Temperature, DC process, AC Volts/Amps and DC Volts/Amps.
|
 Our
1/4 DIN Instruments
Series 1400
Models include single loop profile control with up to eight set-point
profiles; each of which can have up to six ramp and six soak segments.
These models can function as stand-alone controllers and manual/auto
mode function is standard.
The 1400 series also offer ALL of the features/functions and benefits
incorporated into the above Partlow Brand line of
controllers including the additional features and functions outlined
below.
|
|
FEATURES and FUNCTIONS
common to most of the Partlow Brand Controllers
Models
in most series are available for Hi-limit safety shutdown with
integral or remote RESET buttons and a wide variety of
ON/OFF, Time Proportioning and PID control outputs plus, Set
Point/Loop Profile controller configurations are also available.
Inputs include T/C's, RTD's, and ALL commonly accepted analog
inputs such as 4-20mA and DC volts which, are scaleable.
Standard
features in most models include: a comprehensive THREE YEAR
warranty, adaptive "hands free" auto tune for better
overall "quality control" and easier setup, ramp to
set point safety feature, universal power supply giving global
flexibility, one button Auto/Manual switching with % output
indication in the Manual Mode, acceptance of any standard input,
configuration upload port, ULc, FM, CE & Nema (when panel
mounted) approvals,
Optional
features available with most models include: RS485 communications,
up to four selectable outputs, 24 V AC/DC operation, Transmitter
power supply and process signal retransmission output.
|
ANDERSON
CONTROLS
Your Single
Source For Process Instrumentation & Service |
7-130 INDUSTRY
ST
TORONTO ON M6M 5G3
Tel: 416 766-4195 Fax: 416-766-3948
Toll Free: 1 877
333-8882
|
|
