|
PMV
P2000 Series Electro-Pneumatic Valve Positioner from Cancoppas Limited |
 The
PMV P2000 Series Electro-Pneumatic Valve
Positioner is one of the sturdiest, reliable Electro-Pneumatic
Positioners on the market. Controlling air delivery with the standard
spool valve assembly and receiving the 4-20mA control signal through
our voice coil magnet unit assembly, this positioner offers a wide
range of features and benefits.
PMV P2000 Series Electro-Pneumatic Valve Positioner has an internal
gain adjustment, as with other Positioner models, the easy to reach
span and zero adjustment makes this model very simple to calibrate.
PMV P2000 Series Electro-Pneumatic Valve Positioner is also available
for intrinsically safe applications and is approved by CENELEC (PTB),
CSA, and UL.
|
|
Suspended Solids Sensor
from Cancoppas Limited |
 Supports
one Optical Dissolved Oxygen
Sensor (Model 10).- NEMA
4x enclosure with 4 predrilled and
plugged conduit holes.
- Part
Selection and design conforms to applicable
UL/CSA/CE safety standards.
- 115/230
VAC selector switch; 50/60 Hz: Heater
terminals; standard glass fuse
- Initial
calibration.
...more Suspened Solids Sensors
|
|
Plum
Bob Level Monitor
from Cancoppas Limited |
 Weight-and-cable
devices, also known as Plumb Bob's
started out as simple electromechanical devices, but most have been
replaced by a sensor that uses optical techniques and a micro controller,
resulting in very high resolution, accuracy, and torque control.
They are primarily used for dry solids but can be outfitted to work
with liquids. These devices typically involve lowering a weighted
cable into a vessel. The weight stops when it reaches the surface
of the material and then retracts into a sensor housing mounted
on top of the vessel.
|
|
Residual
Chlorine Analyzer
from Cancoppas Limited |
 The
Residual Chlorine Analyzer utilizes the most accurate test method
to determine chlorine residual levels in process waters, similar
to that used in lab environments titrator test methods. This makes
it an excellent choice for chlorine control or monitoring applications.
Residual readings are instantaneous and do not rely on "sample
and hold" methods. This minimizes any delay in readings for
control applications.
...more Residual Chlorine Analyzers |
