|
 Aysix
LTX01 Series 2-Wire Level Transmitter is a highly reliable microprocessor
based sensor designed to measure tank levels of liquids and
certain dry bulk media in metal tanks. LTX01 Series 2-Wire Level
Transmitter measure the change in capacitance that occurs as
the tank level changes and outputs a standard loop-powered 4-20mA
signal. After calibration any change in level is recognized
and converted to an analog 4-20mA signal. LTX01 Series 2-Wire
Level Transmitter use very high frequency and very low amplitude
sensing circuitry to greatly minimize the effects of coating
on the sensing probe.
The
LTX01 Series
2-Wire Level Transmitter
includes a standard 4 - 20mA loop powered LTX transmitter housed
in a rugged enclosure, a 0.50-inch diameter rigid probe for
ranges up to 20 feet and a fitting. Probe material is SS316,
supplied bare or PFA jacketed. The LTX01
Series 2-Wire Level Transmitter
is designed for tanks which have fitting connections of 3/4
NPT or larger.
LTX01 Series
2-Wire Level Transmitter
can be used in many tough industrial applications. This level
sensor is shock resistant and very rugged. There are no moving
parts. PFA jacketed probe can withstand temperatures of up to
200°C and pressures to 500 psi.
Capacitance Level Switch Features:
 Continuous
loop powered 4-20 mA operation - Microprocessor
Based
- Accuracy 1%
of span for constant dielectric of material
- Non-interactive
zero and span calibration
- Calibration
accomplished with 4 push buttons
- Heavy duty
industrial design
- NEMA rated
aluminum, stainless, PVC and explosion proof housings available
- Standard fitting
3/4 NPT, flange and special fittings available
Capacitance Level Switch Applications:
- Water and
water-based liquids
- Jacketed probes
required for conductive media
- Organic Acids
- Oils and fuels
in some metallic tanks
- Use bare probes
with nonconductive media
- Use cable
probes where top side access is limited
- On-site calibration
required
- Not recommended
where material dielectric changes
- Tank must
be conductive or grounding may be required or see other Aysix
level probe
|
