|
|
|
Level
Measurement |
| Pro
I-FL Flushmount Capacitance Probe |
|
 The
Pro I-FL Flushmount Capacitance Probe features a noninvasive
design that mounts on the exterior of the vessel. Applicable
for a wide range of solid, liquid, and slurry materials
where intrusiveness is a concern. Available in Pro I, Pro
IIX, Pro X, Pro DC, Pro Remotes, and Pro Auto-Cal model
types.
Features
- No vessel intrusion with
flush mount design
- Pro Shield protects against
material buildup on probe surface
- Simple, precise "Quick
Set" calibration
- Fail-safe protection
- Bin wall adapter available
when working with thick walls or angled hoppers.
|
|
Specifications
|
| Power Requirements: |
120/240 VAC, 12/24 VDC
50/60 Hz ± 15%, 5VA |
| Output Relay: |
DPDT 10 Amp at 250 VAC |
Ambient Temperature
Electronics:
Sensor: |
-40° to
+185°F (-40° to +85°C)
+150°F Standard, +450°F High Temp |
| Pressure: |
250 PSI, Flush Mount |
| Sensitivity
Setting: |
Adjustable Sensitivity to
< 1 Picofarad |
| Calibration: |
"Quick Set" Course/Fine
Single Turn Potentiometers |
| Fail-Safe: |
Switch Selectable High/Low |
| Time
Delay: |
Adjustable .25 to 10 seconds |
| Enclosure: |
Cast Aluminum, Bolt-on Cover
USDA Approved Finish |
| Conduit Entry: |
¾" NPT |
| Mounting: |
Flush Mount, Non-Invasive |
| Pro Shield: |
Compensates For Material Build-up
On Sensing Probe |
| Approval Ratings: |
NRTL/C
NEMA 4X, 5 and 12
NEMA 7 & 9 Available |
| Status Indicator: |
Visual LED Indicates Sensor
Status:
Uncovered, Covered and Power Failure |
| Probe Options:
|
Flush Mount Sensor,
Standard and High Temp |
|
|
|
