|
|
|
Level
Measurement |
| Sanitary
Capacitance Level Sensors from BinMaster |
|
 The
Pro II X 3A conforms to the 3A and USDA sanitary standards
for sensors and sensor fittings used for milk and milk products'
equipment. It also conforms to food grade and pharmaceutical
standards. However, its durable, abrasion resistant probe
assembly makes it suitable for use in a variety of solids,
liquids, and slurries.
Features
- 3A design for dairy and
food applications is 3A and USDA recognized
- Holds calibration across
entire temperature span
- Operates below RF range,
eliminating RF interference
- Pro Shield protection
ignores material buildup on probe
- Fail-safe protection
|
|
Specifications
|
| Power Requirements: |
120/240 VAC
50/60 Hz ± 15%, 5VA |
| Output Relay: |
DPDT 10 Amp at 250 VAC |
Ambient Temperature
Electronics:
Probe: |
-40° to
+185°F (-40° to +85°C)
Up to +250°F (121°C) |
| Pressure: |
200 PSI |
| Sensitivity
Setting: |
Adjustable Sensitivity to
< 1 Picofarad |
| Calibration: |
"Quick Set" Course/Fine
Single Turn Potentiometers |
| Fail-Safe: |
Switch Selectable High/Low |
| Time
Delay: |
Adjustable .25 to 10 seconds |
| Enclosure: |
Cast Aluminum, Bolt-on Cover
USDA Approved Finish |
| Mounting: |
1" Sanitary Ferrule With
Optional Tri-Clover "Quick Release" Clamp |
| Approval Ratings: |
CSA, NRTL/C
NEMA 4X, 5, 9 and 12
Explosion Proof for
Class II, Div. 1 & 2, Groups E, F, & G
3A Dairy Food Grade |
|
|
|
