|
 Model
P2 - Low Cost Gage Pressure Transducers
Model P2 Gage
Pressure Transducers Description
Validyne's new Model P2 Gage Pressure
Transducers provide a low cost solution for pressure measurement
in a wide variety of industrial and OEM applications. With a rugged
design and stainless steel wetted parts, Model P2 Gage Pressure
Transducers feature superior performance at a reasonable price.
Units are offered with a high level output of 4 to 20 mA or 0
to 5 Vdc.
The Model P2 Gage Pressure Transducers has a standard 1/4" male
pipe thread connection, and comes with a mating DIN electrical
connector for fast wiring. Model P2 Gage Pressure Transducers
superior performance is assured through the use of chemical vapor
deposition strain gage technology. Sensors are produced on wafers
in large batches by depositing silicon dioxide and polysilicon
on a stainless steel substrate, resulting in a strong, reliable
design. The Model P2 Gage Pressure Transducers are accurate to
0.25% and have excellent long term stabiity. They resist shock
and vibration and are compensated for -4 to +176 F ambient environments.
Applications
for the Model P2 Gage Pressure Transducers
include:
-
Pumps and Compressors
-
Hydraulic Systems
-
Refrigeration
-
Pneumatic Systems
Model P2 Gage Pressure Transducers
Specification Summary
Available Pressure Ranges:
- 0-15 psig
- 0-30 psig
- 0-60 psig
- 0-100 psig
- 0-200 psig
- 0-500 psig
- 0-1000 psig
- 0-3000 psig
- 0-5000 psig
Signal Output: 4-20 mA or 0.1-5V
Power Required:
24 Vdc nominal
4-20 mA Output: 12-36 Vdc
0.1 - 5V Output: 7.5 to 30 Vdc
Pressure Port:1/4" NPT Male
Proof Pressure:
2x Operating Press <= 3000 psi;
1.5x Operating Pressure > 3000 psi
Burst Pressure: 5x Operating Pressure, minimum
Fatigue Life: 100 Million Cycles
Error Band: +/-0.25% span, including Non-linearity, Hysteresis
and Non-repeatability
Compensated Temp Range: -4 to +176ºF
Thermal Error Band: +/-1.5% Span over Compensated Temperature
Range
Vibration: 35g Peak Sinusoidal; 5 to 2000 Hz
Isolation: 100 MOhms @ 50 Vdc
Enclosure: NEMA 4
Wetted Material: 17-4 PH Stainless Steel, Nickel Braze
Weight: 3.5 Oz, max
Stability: 0.2% Span over 1 year |
