Description
The FT444DH Indirect Cavity Pressure Transducer measures plastic melt
pressure in the mold cavity by sensing the force via an ejector or sensing
pin. The force on the sensing pin is directly proportional to the cavity
pressure. Model FT444DH mounts by sliding into a slot machined in the
mold ejector plate or support plate, with its sensing button resting
behind the pin. The FT444DH can be interchanged between molds to minimize
the number of transducers required.
Features
- Water resistant construction
- High temperature capability
- Interchangeable between molds
- Internal shunt calibration
- Small size, easily installed
- Insertion tool provided
|
 |
