Description
The FT445 and FT446 Indirect Cavity Pressure Transducers measure plastic
melt pressure in the mold cavity by sensing the force applied via an
ejector or sensing pin. The force generated by the ejector pin is directly
proportional to the area of the pin multiplied by the cavity pressure.
All models can be permanently installed in the mold ejector plate or
support plate. The FT446H features a box - mounted connector. The FT446HM
features a flush - mounted connector. The FT445 is a lower cost model
and is supplied without a connector
Features
- Senses cavity pressure via an ejector
pin
- Water resistant
|
 |
