 The
Two Channel Precision Thermometer Tek Know SM300 Signal Master, when used
with a calibrator, the SC200 or Pre Cal software, and a PC creates a totally-automated
calibration system.
The Two Channel Precision Thermometer Tek Know SM300 Signal Master connects
via the RS-232 ports to both the PC and the calibrator. Obtaining true
calibration couldn’t be easier: connect the cables and the sensor or system,
set the calibration points (up to 20), and press “Start.”
Using a calibrated RTD, the Two Channel Precision Thermometer Tek Know
SM300 Signal Master will allow the calibrator to run, using the test sensor
in a parallel reference hole. This allows for a total system accuracy
approaching ±0.2°F.
The Two Channel Precision Thermometer Tek Know SM300 Signal Master can
also be used as a high-accuracy thermometer and converter. The two Pt-100
ports allow for the use of an external temperature reference together
with the sensor being tested.
 Two
Channel Precision Thermometer Tek Know SM300 Signal Master Spec Sheet
|
